| No | Content | Download | Pages |
|---|---|---|---|
| 1 | Performance, Emission and Combustion Evaluation of Diesel Engine Using Methyl Esters of Sunflower Oil S. Kirankumar†, N. Govind‡ DOI :10.7508/jmerd.2018.01.001 |
 |
1-8 |
| 2 | A Review on Mechanical Losses and Non-Uniform Expansion of Fluid in A Scroll Expander K. Aparna†, K. Ramakrishna‡ DOI :10.7508/jmerd.2018.01.002 |
|
9-19 |
| 3 | Effect of Processing Parameters on Fabrication of Aluminum Matrix Composite (AMC) through Stir Casting Process Amir Arifin, Gunawan, Riman Sipahutar, Diah Kusuma Pratiwi, G. A Yusuf Iqbal R DOI :10.7508/jmerd.2018.01.003 |
|
20-26 |
| 4 | Optimization of Injector Nozzle in High Pressure Common Rail Injection System Zhang Yong, Qi Bo, Guo Daqing, Meng Guoyou DOI :10.7508/jmerd.2018.01.004 |
|
27-37 |
| 5 | Experimental Evaluation of Surface Geothermal Energy for Air Conditioning Applications in Iraq Ahmed SH. Al-Samari, Sameer D. Ali DOI :10.7508/jmerd.2018.01.005 |
|
38-43 |
| 6 | Study the Opportunity of Using Lost Energy in IC Engine to Generate Steam That Running a Steam Engine Layth Abed Hasnawi Al-Rubaye†, Ahmed ALayth Abed Hasnawi Al-Rubaye†, Ahmed Al-Samari †‡, & Lutfi. y. zedan†l-Samari †‡**, & Lutfi. y. zedan† DOI :10.7508/jmerd.2018.01.006 |
|
44-50 |
| 7 | Semi-Analytical Approach to Heat Transfer in Squeezing Flow between Two Parallel Disks with and without Velocity Slip and Temperature Jump Sampath Kumar V S, N P Pai DOI :10.7508/jmerd.2018.01.007 |
|
51-61 |
| 8 | Experimental Study of Brake System in Light Vehicles Timur Choban Khidir, Abbas Mohammed Ismael DOI :10.7508/jmerd.2018.01.008 |
|
62-67 |
| 9 | Formation of Ultrathin Film between Two Molecularly Smooth Surfaces M. F. ABD AL-SAMIEH DOI :10.7508/jmerd.2018.01.009 |
|
68-77 |
| 10 | Effect of Sputtering Pressure on Structural, Optical and Electrochromic Properties of Tungsten Oxide Film Deposited By Sputtering Vyomesh R Buch†, Sushant K Rawal‡, Amitkumar Chawla § DOI :10.7508/jmerd.2018.01.010 |
|
78-85 |
| 11 | An Experimental Investigation of Process Parameters of Tungsten Inert Gas Welding for improvement of Mechanical Properties on Duplex Stainless Steel (2205) weldments Using Design of Experiments A. Balaram Naik, A. Chennakesava Reddy, V. Venugopal Reddy DOI :10.7508/jmerd.2018.01.011 |
|
86-96 |
| 12 | Unsteady MHD Convective Laminar Flow between Two Vertical Porous Plates with Mass Transfer B. LAVANYA DOI :10.7508/jmerd.2018.01.012 |
|
97-109 |
| 13 | Optimization of Damping Material Placement for Auto-Body Floor Sha Xu, Hao Chen,Yu Duan DOI :10.7508/jmerd.2018.01.013 |
|
110-116 |
| 14 | Physical Resources Prioritization T. L. Veynbender†, V. Kashintseva‡ DOI :10.7508/jmerd.2018.01.014 |
|
117-124 |
| 15 | Modeling Two Phase Flow Heat Exchangers for Next Generation Aircraft Hayder H. Al-Sarraf †, Assaad Alsahlani ‡ DOI :10.7508/jmerd.2018.01.015 |
|
125-135 |
| 16 | An Investigation on Corrosion Behaviour of Similar Friction Stir Welded Joints Vuppula Prasanna†, A. Seshu Kumar‡, P. Ramesh Babu DOI :10.7508/jmerd.2018.01.016 |
|
136-141 |
| 17 | Computer-Based Study of Patterns in Fish Pond Ecosystem Evolution Fayzali Komilov†, Sai DOI :10.7508/jmerd.2018.01.017 |
|
142-150 |
| 18 | Use of a Quality Management System at the Iron and Steel Enterprise Dinara Kremcheeva, Eldar Kremcheev DOI :10.7508/jmerd.2018.01.018 |
|
151-155 |
| 19 | Clean Water: Design of an efficient and feasible water treatment plant for rural South-Bengal Avijit Mallik, Md. Arman Arefin DOI :10.7508/jmerd.2018.01.019 |
|
156-167 |
| 20 | Thermo-physical Properties of Water +Ethylene Glycol based Alumina Nanofluids S. Ravi Babu†, G. Sambasiva Rao‡ DOI :10.7508/jmerd.2018.01.020 |
|
168-176 |
| 21 | An Analysis of Cutting Force and Surface Finish in Surface Grinding of Aisi H13 Steel P.V. Vinay†, Ch. Srinivasa Rao‡, K. Pavan Kumar† DOI :10.7508/jmerd.2018.01.021 |
|
177-189 |
| 22 | Experimental Study of Concentric Tube Heat Exchanger Using Cuo–Water based Nanofluid Rajnish Kumar,Arun Kumar DOI :10.7508/jmerd.2018.01.022 |
|
190-198 |