| No | Content | Download | Pages |
|---|---|---|---|
| 1 | PERFORMANCE EVOLUTION OF AN IMPROVED SOLAR THERMAL HOT AIR HEATING SYSTEM FOR DRYING GROUND-NUTS Agarwal A., Seretse O.M., Letsatsi M.T., Maele L.T., Koketso D. DOI :10.26480/jmerd.03.2019.01.05 Visitor download : [download_data id=”3101″ data=”download_count”] |
 |
1-5 |
| 2 | THE INFLUENCE OF ADDITIONAL DISCHARGE OF THE BRAKE LINE ON THE LONGITUDINAL DYNAMICS OF THE TRAIN DURING BRAKING Nikolay E. Razinkin, Nina I. Voronova, Yaroslav D. Podlesnikov, Sergey N. Danilov DOI :10.26480/jmerd.03.2019.06.09 Visitor download : [download_data id=”3103″ data=”download_count”] |
|
6-9 |
| 3 | INFLUENCE OF THE HUMAN-MACHINE SYSTEMS (HMS) OPERATION MODE ON THE INCREASE OF GRAIN-HARVESTING AGGREGATES PRODUCTIVITY Igor E. Lipkovich, Irina V. Egorova, Nadezhda V. Petrenko, Anna S. Gayda DOI :10.26480/jmerd.03.2019.10.14 Visitor download : [download_data id=”3105″ data=”download_count”] |
|
10-14 |
| 4 | EFFECTIVE TECHNOLOGIES OF DISSOLUTION OF ORGANIC DEPOSITS IN THE BOTTOMHOLE ZONE OF OIL WELLS REGISTRATION FORM Dairabay Zh. Abdeli, Bae Wisap, Bakytzhan R. Taubayev DOI :10.26480/jmerd.03.2019.15.18 Visitor download : [download_data id=”3107″ data=”download_count”] |
|
15-18 |
| 5 | COMPUTER WITH CHANGEABLE ARCHITECTURE Valery A. Konyavsky, Gennady V. Ross DOI :10.26480/jmerd.03.2019.19.23 Visitor download : [download_data id=”3109″ data=”download_count”] |
|
19-23 |
| 6 | DEVELOPMENT OF EFFECTIVE TECHNOLOGY OF DEEP WATER TREATMENT FROM SUSPENDED SOLID PARTICLES FOR FORMATION PRESSURE MAINTENANCE AT THE OIL FIELDS Dayrabay Zh. Abdeli, Wisup Bae, Assel B. Seiden, Adi Novriansyah DOI :10.26480/jmerd.03.2019.24.29 Visitor download : [download_data id=”3111″ data=”download_count”] |
|
24-29 |
| 7 | THE INFLUENCE OF NANO PARTICLES ADDITIVE ON TRIBOLOGICAL PROPERTIES OF AA2024-T4 COATED WITH TiN OR SiN THIN FILMS Nasri S. M. Namer, Sami Ali Nama, Marwan T. Mezher DOI :10.26480/jmerd.03.2019.30.34 Visitor download : [download_data id=”3113″ data=”download_count”] |
|
30-34 |
| 8 | REVIEW OF HYDROGEN FUEL FOR INTERNAL COMBUSTION ENGINESREVIEW OF HYDROGEN FUEL FOR INTERNAL COMBUSTION ENGINES M. Faizal, L. S. Chuah, C. Lee, A. Hameed, J. Lee, M. Shankar DOI :10.26480/jmerd.03.2019.35.46 Visitor download : [download_data id=”3115″ data=”download_count”] |
|
35-46 |
| 9 | INVESTIGATION ON THE MECHANICAL PROPERTIES OF PLA & ITS COMPOSITE FABRICATED THROUGH ADVANCED FUSION PLASTIC MODELLING K.G. Jaya Christiyan, U. Chandrasekhar, K. Venkateswarlu DOI :10.26480/jmerd.03.2019.47.54 Visitor download : [download_data id=”3117″ data=”download_count”] |
|
47-54 |
| 10 | APPLYING PHOTOELASTICITY WITH OPTICAL MAGNIFICATION METHOD TO INCREASE PRECISION OF DETERMINING FRINGE ORDER UNDER MONOCHROMATIC LIGHT M.B.H Sitorus, Melvin Emil Simanjuntak, Agus Sigit Pramono, Henry Lumbantoruan, Udur January Hutabarat, B. Ginting, Piktor Tarigan, Teng Sutrisno DOI :10.26480/jmerd.03.2019.55.61 Visitor download : [download_data id=”3119″ data=”download_count”] |
|
55-61 |
| 11 | ASSESSMENT OF ENGINEERING SPECIALITY TEACHING IN THE PERIOD OF INTEGRATION Nguyen Thi Xuan Huong, Bui Thi Dieu Thuy DOI :10.26480/jmerd.03.2019.62.65 Visitor download : [download_data id=”3121″ data=”download_count”] |
|
62-65 |
| 12 | INVESTIGATING THE PERFORMANCE OF ELECTROMAGNETIC PUMP FABRICATED USING TOOL BASED MICROMACHINING SETUP FOR MICRODELIVERY OF FLUID Veeresha, R.K., Shilpa, M.K., Muralidhara, Rathnamala Rao, Nithin Kumar DOI :10.26480/jmerd.03.2019.66.70 Visitor download : [download_data id=”3123″ data=”download_count”] |
|
66-70 |
| 13 | A STUDY ON THE FACTORS AFFECTING THE FLARE OF THE WELD WHEN WELDING THE STEEL WIRE Minh Quang Chau DOI :10.26480/jmerd.03.2019.71.75 Visitor download : [download_data id=”3125″ data=”download_count”] |
|
71-75 |
| 14 | IMPROVED THE ADAPTATION FOR THREE PHASE ACTIVE FILTER UNDER NON-IDEAL-LOAD USING SAMPLE CURRENT CONTROL Huynh Le Minh Thien, Nguyen Xuan Tien, Tran Thanh Vu, Ho Van Cuu DOI :10.26480/jmerd.03.2019.76.80 Visitor download : [download_data id=”3127″ data=”download_count”] |
|
76-80 |
| 15 | EFFECT OF DIFFERENT QUENCHING MEDIA ON MECHANICAL PROPERTIES OF AISI 1018 LOW CARBON STEEL Minh Quang Chau DOI :10.26480/jmerd.03.2019.81.83 Visitor download : [download_data id=”3129″ data=”download_count”] |
|
81-83 |
| 16 | INFLUENCE OF VIBRATIONS DURING DIRECTIONAL SOLIDIFICATION ON MICROSTRUCTURE, HARDNESS AND STRENGTH OF Al-Si-GRAPHITE FG COMPOSITE Ramesh Babu N, Ramesh MR, Kiran Aithal S DOI :10.26480/jmerd.03.2019.84.86 Visitor download : [download_data id=”3131″ data=”download_count”] |
|
84-86 |
| 17 | TESTING AND ANALYSING THE GRINDING UNIFORMITY OF POLYMER PRODUCTS Josef Flizikowski, Ali Al-Zubiedy, Zoalfokkar Kareem Alobad DOI :10.26480/jmerd.03.2019.87.90 Visitor download : [download_data id=”3133″ data=”download_count”] |
|
87-90 |
| 18 | A NUMERICAL STUDY OF THE TURBULENCE MODEL INFLUENCE ON A SAVONIUS WIND TURBINE PERFORMANCE BY MEANS OF MOVING MESH Nopem Ariwiyono, Priyo A. Setiawan, Adi W. Husodo, Sudiyono, Arief Subekti, Anda I. Juniani, Subagio So’im, Projek P. S. Lukitadi, Rini Indarti, Fais Hamzah DOI :10.26480/jmerd.03.2019.91.93 Visitor download : [download_data id=”3135″ data=”download_count”] |
|
91-93 |
| 19 | PSEUDO ELASTIC METHODS FOR DAMAGE ASSESSMENT OF COMPOSITE TUBES Venkateswarlu Gattineni, Venukumar Nathi DOI :10.26480/jmerd.03.2019.94.101 Visitor download : [download_data id=”3137″ data=”download_count”] |
|
94-101 |
| 20 | INFLUENCE OF HEAT TREATMENT AND DEFORMATION ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES Cu-Ni-Sn ALLOY Nguyen Duong Nam DOI :10.26480/jmerd.03.2019.102.105 Visitor download : [download_data id=”3139″ data=”download_count”] |
|
102-105 |
| 21 | EFFECT OF ANISOTROPIC MATERIAL ON THE GEOMETRIC NON-LINEAR PERFORMANCE ANALYSIS OF SMART LAMINATED COMPOSITE PLATE INTEGRATED WITH DISTRIBUTED AFC PATCHES Srinivas M Prabhu, NithinKumar, Ashok M H, VishwanathKhadakbhavi, Santosh Nandurkar DOI :10.26480/jmerd.03.2019.106.109 Visitor download : [download_data id=”3141″ data=”download_count”] |
|
106-109 |
| 22 | MIXING IN TURBULENT COAXIAL JET Safer Nabil Belkacem, Beghidja Abdelhadi DOI :10.26480/jmerd.03.2019.110.119 Visitor download : [download_data id=”3143″ data=”download_count”] |
|
110-119 |
| 23 | USING BRASS FOIL INTERLAYER TO IMPROVE THE RESISTANCE SPOT WELDING AA5451 WITH APPLY TAGUCHI METHOD Osamah Sabah Barrak, Mohammed Helan Sar, Mursal Luaibi Saad, Abbas Khammass Hussein, Sabah Khammass Hussein DOI :10.26480/jmerd.03.2019.120.124 Visitor download : [download_data id=”3145″ data=”download_count”] |
|
120-124 |
| 24 | STUDY OF FRACTURE BEHAVIOUR OF COMPOSITE LAMINATE WITH CENTRAL CIRCULAR CRACK EXPOSED TO THERMO-MECHANICAL LOADING WITH TEMPERATURE RISE V.V.Venu Madhav,A.V.S.S.K.S. Gupta, P. Rakesh DOI :10.26480/jmerd.03.2019.125.132 Visitor download : [download_data id=”3147″ data=”download_count”] |
|
125-132 |
| 25 | EFFECT OF CROSS FLOW ON MASS SUCTION IN A STRAIGHT LOUVERED FUNNEL Avik Bhattacharya, A Madhusudan Achari DOI :10.26480/jmerd.03.2019.133.139 Visitor download : [download_data id=”3149″ data=”download_count”] |
|
133-139 |