| No | Content | Download | Pages |
|---|---|---|---|
| 1 | PROCESS MODELING AND EXPERIMENTAL VERIFICATION OF THE CONDITIONS OF ICE COVERAGE DESTRUCTION OF AUTOMOBILE ROADS Mikhail Doudkin, Alina Kim, Georgy Guryanov, Marek Mlynczak, Murat Eleukenov, Andrey Bugaev, Valery Rogovsky DOI :10.26480/jmerd.04.2019.01.08 Visitor download : [download_data id=”3072″ data=”download_count”] |
 |
1-8 |
| 2 | MECHANICAL STRESSES ANALYSIS IN CYLINDER LINER FOR PERKINS 1306 DIESEL ENGINE Abdul Wahab Hassan Khuder, Ammar Ali AL-Filfily, Khalid M. Sowoud DOI :10.26480/jmerd.04.2019.09.13 Visitor download : [download_data id=”3074″ data=”download_count”] |
|
9-13 |
| 3 | STRESS AND VIBRATION ANALYSES OF THE WIND TURBINE BLADE (A NREL 5MW) Sura Zuheir, Oday Ibraheem Abdullah, Mustafa Al-Maliki DOI :10.26480/jmerd.04.2019.14.19 Visitor download : [download_data id=”3076″ data=”download_count”] |
|
14-19 |
| 4 | IMPROVEMENT ELECTROLYSIS OF WATER EFFICIENCY FOR HYDROGEN PRODUCTION USING STAINLESS STEEL NANOPARTICLES SYNTHESIZED BY LASER TECHNIQUE Rabea. Q. Nafil, Munaf S. Majeed, Emad Talib Hashim DOI :10.26480/jmerd.04.2019.20.22 Visitor download : [download_data id=”3078″ data=”download_count”] |
|
20-22 |
| 5 | PREPARATION AND FACILITATION OF ANTIBACTERIAL ACTIVITY, HYDROPHILICITY OF PIEZO–PVDF/n-MgO FILM BY ELECTRO-SPINNING AND SPIN COATED FOR WOUND DRESSING: A COMPARATIVE STUDY Asra Ali Hussein and Ohood Hmaizah Sabr DOI :10.26480/jmerd.04.2019.23.31 Visitor download : [download_data id=”3080″ data=”download_count”] |
|
23-31 |
| 6 | MECHANICAL PROPERTIES OF WELDING JOINTS USING TUNGSTEN ARC WELDING (TIG) AT DIFFERENT DC CURRENT Munaf Hashim Ridha Ahmed Ibrahim Razooqi and Muammar Ibrahim Ismail DOI :10.26480/jmerd.04.2019.32.36 Visitor download : [download_data id=”3082″ data=”download_count”] |
|
32-36 |
| 7 | PERFORMANCE OF SYNTHETIC JET FORCED CONVECTION COOLERS USING SINE, SQUARE, TRIANGULAR WAVE VARIATIONS Damora Rhakasywi, Muhamad As’adi, Nur Cholis, Bintang Arya Putra DOI :10.26480/jmerd.04.2019.37.42 Visitor download : [download_data id=”3084″ data=”download_count”] |
|
37-42 |
| 8 | A REVIEW ON ANALYSIS AND MODELLING OF IMPINGING JETS Bandana Swain, Shebaz A Memon, A. Madhusudan Achari, Vishal Mehta DOI :10.26480/jmerd.04.2019.43.51 Visitor download : [download_data id=”3086″ data=”download_count”] |
|
43-51 |
| 9 | BURR FORMATION MECHANISMS DURING SLOT-END MILLING OPERATIONS FOR LOW CARBON AND STAINLESS STEELS S. A. Amin Alrabii DOI :10.26480/jmerd.04.2019.52.58 Visitor download : [download_data id=”3088″ data=”download_count”] |
|
52-58 |
| 10 | THE ENHANCEMENT OF NATURAL CONVECTION HEAT TRANSFER IN CYLINDRICAL COMPOSITE LAMINATE ENCLOSURE WITH POROUS MEDIA BY USING CARBON NANOTUBES Noor H. Dhaher, Furkan Kamil, Hayder H. Khaleel DOI :10.26480/jmerd.04.2019.59.70 Visitor download : [download_data id=”3090″ data=”download_count”] |
|
59-70 |
| 11 | MULTIPLE MODERN METHODS FOR IMPROVING PHOTOVOLTAIC CELL EFFICIENCY BY COOLING: A REVIEW Ahmed MohsinAlsayah, Mahdi Hatf Kadhum Aboaltabooq, Mahir H. Majeed, Amjed Abdulelah Al-Najafy DOI :10.26480/jmerd.04.2019.71.78 Visitor download : [download_data id=”3092″ data=”download_count”] |
|
71-78 |
| 12 | NUMERICAL MODELING FOR MECHANICAL CHARACTERISTICS STUDY OF DIFFERENT MATERIALS ARTIFICIAL HIP JOINT WITH INCLINATION AND GAIT CYCLE ANGLE EFFECT Muhannad Al-Waily, Emad Q. Hussein, Nibras A. Aziz Al-Roubaiee DOI :10.26480/jmerd.04.2019.79.93 Visitor download : [download_data id=”3094″ data=”download_count”] |
|
79-93 |
| 13 | SIMPLIFIED METHOD FOR SELECTION OF DUAL PRODUCTION EQUIPMENT FOR MULTI-STACK OIL FIELD DEVELOPMENT Valeriy A. Kostilevsky, Oleg V. Bikbulatov DOI :10.26480/jmerd.04.2019.94.96 Visitor download : [download_data id=”3098″ data=”download_count”] |
|
94-96 |
| 14 | TEMPERATURE PROFILES ON MULTI-LOCATION OF STEAM FLOW CONDENSATION COOLED USING PARALLEL FLOWING WATER IN THE OUTSIDE OF A HORIZONTAL PIPE Sukamta, Sudarja DOI :10.26480/jmerd.04.2019.97.101 Visitor download : [download_data id=”3188″ data=”download_count”] |
|
97-101 |
| 15 | OPTIMAL WELDING PROCESS SELECTION TO FABRICATE CRUDE OIL FILTER TOWER JOINTS BY INTEGRATION OF MULTI CRITERIA DECISION MAKING PROCESSES Kawakib A.K. Al- Mendwi, Dr. Qasim M. Doos DOI :10.26480/jmerd.04.2019.102.107 Visitor download : [download_data id=”3190″ data=”download_count”] |
|
102-107 |
| 16 | THE STUDY OF THE MASS VARIATION OF FORWARDER’S BUNDLE ON THE BASIS OF MACHINE EXPERIMENT Pavel Budnik, Ilya Shegelman, Vyacheslav Baklagin DOI :10.26480/jmerd.04.2019.108.117 Visitor download : [download_data id=”3194″ data=”download_count”] |
|
108-117 |
| 17 | MECHANICAL PROPERTIES OF POLYMER WITH DIFFERENT REINFORCEMENT MATERIAL COMPOSITE THAT USED FOR FABRICATES PROSTHETIC SOCKET Fahad M. Kadhim, Ayad M. Takhakh, Asmaa M. Abdullah DOI :10.26480/jmerd.04.2019.118.123 Visitor download : [download_data id=”3295″ data=”download_count”] |
|
118-123 |
| 18 | V-BENDING OF GLASS FIBRE REINFORCED POLYPROPYLENE COMPOSITE SHEETS: THE EFFECT OF FORMING TEMPERATURE ON THE SPRINGBACK Mustafa Faisal Zaidan, Khudhayer J. Jadee, Salwa A. Abed DOI :10.26480/jmerd.04.2019.124.129 Visitor download : [download_data id=”3385″ data=”download_count”] |
|
124-129 |
| 19 | A REVIEW ON CHALLENGES AND OPPORTUNITIES OF ELECTRIC VEHICLES (EVS) M. Faizal, S. Y. Feng, M. F. Zureel, B. E. Sinidol, D. Wong, G. K. Jian DOI :10.26480/jmerd.04.2019.130.137 Visitor download : [download_data id=”3295″ data=”download_count”] |
|
130-137 |
| 20 | MODELING AND CONTROL OF HORIZONTAL FLEXIBLE PLATE USING PID-CS CONTROLLER Mohammed Jawad Mohammed, Majida Khalil Ahmed, Basma Abdullah Abbas DOI :10.26480/jmerd.04.2019.138.142 Visitor download : [download_data id=”3385″ data=”download_count”] |
|
138-142 |
| 21 | INVESTIGATION OF FLASH EVAPORATION IN SOLAR WATER DESALINATION SYSTEMS Akram W. Ezzat, Eric Hu, Samar Jaber DOI :10.26480/jmerd.04.2019.143.147 Visitor download : [download_data id=”3645″ data=”download_count”] |
|
143-147 |
| 22 | PID CONTROLLER TUNING USING ANT COLONY METHOD FOR SERVO HYDRAULIC SYSTEM Assist. Prof. Shaymaa Mahmood Mahdi, Assist. Lect. Karam Samir Khalid, Assist. Lect Shakir Mahmood Mahdi DOI :10.26480/jmerd.04.2019.148.152 Visitor download : [download_data id=”3649″ data=”download_count”] |
|
148-152 |
| 23 | COMPREHENSIVE ASSESSMENT ON THE VIABILITY FOR ESTABLISHING WASTE COOKING OIL (WCO) BIODIESEL PROCESSING FACILITY IN AN ECO-TOURISM ISLAND Nur Mazlini Razali,Tuan Ab Rashid Tuan Abdullah,Wan Asma Ibrahim, Muhamad Nazrain Muhamad Nassri DOI :10.26480/jmerd.04.2019.153.156 Visitor download : [download_data id=”3658″ data=”download_count”] |
|
153-156 |
| 24 | RECOVERABILITY RATE OF WASTE COOKING OIL (WCO) FROM RESTAURANTS/CAFÉ AND HOTELS BASED ON WCO SAMPLING AND FIELD DATA ASSESSMENTS Assist. Prof. Shaymaa Mahmood Mahdi, Assist. Lect. Karam Samir Khalid, Assist. Lect Shakir Mahmood Mahdi DOI :10.26480/jmerd.04.2019.157.160 Visitor download : [download_data id=”3664″ data=”download_count”] |
|
157-160 |
| 25 | ENHANCEMENT OF POWER SYSTEM TRANSIENT STABILITY OF A MULTIMACHINE BASED ON INTERACTIONS OF PSS WITH FACTS DEVICES Zinah S. Hasan, Majli Nema Hawas DOI :10.26480/jmerd.04.2019.161.167 Visitor download : [download_data id=”3675″ data=”download_count”] |
|
161-167 |
| 26 | NANOINDENTATION MEASUREMENT ON INTERSTITIAL AND OSTEON OF BONE WITH OSTEOGENESIS IMPERFECTA-TYPE III N. A. Azizan, K. S. Basaruddin, M. H. Mat Som, S. F. Khan, A. R. Sulaiman, A. Shukrimi DOI :10.26480/jmerd.04.2019.168.171 Visitor download : [download_data id=”3689″ data=”download_count”] |
|
168-171 |
| 27 | PERFORMANCE ENHANCEMENT OF AIRCRAFT ENGINE AXIAL FLOW TURBINE USING THEORETICAL, EXPERIMENTAL AND NUMERICAL APPROACHES – A REVIEW Varun Chivukula, Ruchika Mohla, Srinivas G DOI :10.26480/jmerd.04.2019.172.183 Visitor download : [download_data id=”3695″ data=”download_count”] |
|
172-183 |
| 28 | PARAMETRIC STUDY ON BENDING ANALYSIS OF LAMINATED COMPOSITE AND SANDWICH PLATES USING SHEAR AND NORMAL DEFORMATION THEORY Aquib Javed and Najeeb Ur Rahman DOI :10.26480/jmerd.04.2019.184.190 Visitor download : [download_data id=”3698″ data=”download_count”] |
|
184-190 |
| 29 | TRENDS OF HYBRID EARTH-AIR-PIPE (EAP) PHOTOVOLTAIC COOLING SYSTEM FOR EFFICIENCY IMPROVEMENT: A REVIEW Stevenson Guramun, Mohd Suffian Misaran, Mohd Kamel Wan Ibrahim and Md Mizanur Rahman DOI :10.26480/jmerd.04.2019.191.195 Visitor download : [download_data id=”3726″ data=”download_count”] |
|
191-195 |
| 30 | EXPERIMENTAL INVESTIGATION ON TAPPING OF Al6061/SiC METAL MATRIX COMPOSITE WITH 2 AND 4 MICRONS TiAlN COATED STRAIGHT FLUTED HSS MACHINE TAPS Nagaraja, Raviraja Adhikari, Sathish Rao U and Sandeep Nambiar DOI :10.26480/jmerd.04.2019.196.205 Visitor download : [download_data id=”3728″ data=”download_count”] |
|
196-205 |
| 31 | RECENT TRENDS IN AERODYNAMIC PERFORMANCE DEVELOPMENTS OF AUTOMOBILE VEHICLES: A REVIEW Rajat Rohit, Chandrakant R Kini and Srinivas G DOI :10.26480/jmerd.04.2019.206.214 Visitor download : [download_data id=”3730″ data=”download_count”] |
|
206-214 |
| 32 | PLASTIC OIL AS AN ALTERNATIVE FUEL IN DIESEL ENGINE Nagaraja, Raviraja Adhikari, Sathish Rao U and Sandeep Nambiar DOI :10.26480/jmerd.04.2019.215.220 Visitor download : [download_data id=”3710″ data=”download_count”] |
|
215-220 |
| 33 | ENHANCING THE LOAD CARRYING CAPABILITY OF AIRFOIL THRUST BEARING USING DIFFERENT CONFIGURATIONS OF FOIL ARRANGEMENT Nagaraja TK, Rathanraj KJ, Ravikumar RN, Arun Kumar V DOI :10.26480/jmerd.04.2019.221.224 Visitor download : [download_data id=”3712″ data=”download_count”] |
|
221-224 |
| 34 | EFFECT OF HEAT TREATMENT ON PROPERTIES OF SINTER FORGED Fe-Cu-C-Cr STEEL Vinay R. Kulkarni, Jagannath Nayak, and Vikram V. Dabhade DOI :10.26480/jmerd.04.2019.225.227 Visitor download : [download_data id=”3714″ data=”download_count”] |
|
225-227 |
| 35 | EFFECT OF CHEMICAL TREATMENTS ON HARDNESS AND TOUGHNESS PROPERTIES OF GREWIA SERRULATA REINFORCED POLYMER COMPOSITES Satish Shenoy B, Mahesha GT, M Vijaya Kini and Padmaraj NH DOI :10.26480/jmerd.04.2019.228.230 Visitor download : [download_data id=”3716″ data=”download_count”] |
|
228-230 |
| 36 | EFFECT OF SiO2 AND Al2O3 ON MECHANICAL PROPERTIES OF ASTM A 494 M GRADE NICKEL ALLOY HYBRID METAL MATRIX COMPOSITES Vidyasagar Shetty, Vijaya Kumar And G Purushotham DOI :10.26480/jmerd.04.2019.231.233 Visitor download : [download_data id=”3752″ data=”download_count”] |
|
231-233 |
| 37 | STUDY OF PERFORMANCE AND EMISSION CHARACTERISTICS OF FOUR STROKE DTSI ENGINE USING PETROL AND CNG AS FUEL AT DIFFERENT SPEEDS Krishna Prasad S Saravanan R And Narasimha Bailkeri DOI :10.26480/jmerd.04.2019.234.237 Visitor download : [download_data id=”3759″ data=”download_count”] |
|
234-237 |
| 38 | REVIEW ON IMPACT RESPONSE OF POLYMER COMPOSITES Mohammed Zubair and Yogeesha Pai DOI :10.26480/jmerd.04.2019.238.242 Visitor download : [download_data id=”3993″ data=”download_count”] |
|
238-242 |
| 39 | HEAT EXCHANGER BY SMOOTH TUBE FOR RECOVERING, UTILIZING THE EXHAUST GAS ENERGY OF SMALL DIESEL ENGINE AIMING AT HEATING PURE VEGETABLE OIL Thi Minh Hao Dong and Van Huong Dong DOI :10.26480/jmerd.04.2019.243.248 Visitor download : [download_data id=”4003″ data=”download_count”] |
|
243-248 |
| 40 | STUDY THE EFFECTS OF PHYSICAL PARAMETERS ON PERFORMANCE IN THE DIVERGENT SOLAR CHIMNEY Ahmed Jawad, Md. Mizanur Rahman, Mohd Suffian Bin Misaran DOI :10.26480/jmerd.04.2019.249.253 Visitor download : [download_data id=”4009″ data=”download_count”] |
|
249-253 |
| 41 | DESIGN AND FABRICATION OF A PORTABLE BIO-DIGESTER TO PRODUCE METHANE GAS FROM FOOD WASTE Yeoh Shir Lee, Md. Mizanur Rahman DOI :10.26480/jmerd.04.2019.254.259 Visitor download : [download_data id=”4011″ data=”download_count”] |
|
254-259 |
| 42 | A REVIEW OF IMPLEMENTATION ON ENVIRONMENTAL MANAGEMENT SYSTEM (EMS) IN SABAH Mohd Adzrie, J Renessh DOI :10.26480/jmerd.04.2019.260.263 Visitor download : [download_data id=”4013″ data=”download_count”] |
|
260-263 |
| 43 | ENERGY AUDIT OF SUBCRITICAL PLANT PERFORMANCE WITH DIFFERENT TYPES OF SUBBITUMINOUS COAL Nuraini A.A., Salmi S., Hairuddin A.A. DOI :10.26480/jmerd.04.2019.264.268 Visitor download : [download_data id=”4015″ data=”download_count”] |
|
264-268 |
| 44 | SOLAR THERMAL: TECHNICAL CHALLENGES AND SOLUTIONS FOR POWER GENERATION Hussain H. Al-Kayiem DOI :10.26480/jmerd.04.2019.269.271 Visitor download : [download_data id=”4017″ data=”download_count”] |
|
269-271 |
| 45 | EXPERIMENTAL INVESTIGATION INTO THE INFLUENCE OF POROUS MEDIA ON THE MIXED CONVECTION HEAT TRANSFER INDUCED INSIDE SECTOR-SHAPED CHANNEL Muna S. Kassim DOI :10.26480/jmerd.04.2019.272.276 Visitor download : [download_data id=”4071″ data=”download_count”] |
|
272-276 |
| 46 | INDUSTRIAL TRACKING CAMERA AND PRODUCT VISION DETECTION SYSTEM Wisam T. Abbood, Hiba K. Hussein and Oday I. Abdullah DOI :10.26480/jmerd.04.2019.277.280 Visitor download : [download_data id=”4079″ data=”download_count”] |
|
277-280 |
| 47 | COMPARISON STUDY OF HAMMERING PHENOMENON FOR HYDRAULIC SYSTEMS USING VARIOUS MATHEMATICAL APPROACHES Maher Abdul Ameer, Ziyad Muhamed Sheet Hamid, Mohammed Ali Karim Najmaldin, Riyad Jassim Tilefih and Amjed Al-Khateeb DOI :10.26480/jmerd.04.2019.281.283 Visitor download : [download_data id=”4088″ data=”download_count”] |
|
281-283 |
| 48 | PROSPECT OF WATER-BASED SOLUBLE COATING COMPOUNDS FOR BIOCIDE-FREE, SELF-POLISHING ANTI-FOULING PAINTS AME Kuok, M Sundang and CS Sipaut DOI :10.26480/jmerd.04.2019.284.287 Visitor download : [download_data id=”4098″ data=”download_count”] |
|
284-287 |