| No | Content | Download | Pages |
|---|---|---|---|
| 1 | ANALYTICAL ANALYSIS FOR CONSTANT WALL TEMPERATURE FOR A PIPE WITH POWER LAW FLUID Ahmed Jassim Shkarah |
 |
1-10 |
| 2 | DESIGN AND SYNTHESIS OF GRAPHENE OXIDE-BASED GLASS SUBSTRATE AND ITS ANTIMICROBIAL ACTIVITY AGAINST MDR BACTERIAL PATHOGENS Ali S. Hasan, Faras Q. Mohammed & Mala M. Takz |
|
11-17 |
| 3 | EXPERIMENT ON THE FORCED CONVECTION AND FRICTION FACTOR OF NANOFLUID IN DOWNWARD FLOW IN SLOPE PIPES Milad Jalali, Farhad Hekmatipour & Ali Marofi |
|
18-35 |
| 4 | FAILURE ANALYSIS OF COMPOSITES PLATE WITH CENTRAL OPENING HOLE SUBJECT TO ARBITRARY TENSION LOAD Emad Q. Hussein, Basim Raheem Sadeq & Farhan Lafta Rashid |
|
36-47 |
| 5 | EFFECT OF HEAT TREATMENT ON MECHANICAL AND VIBRATION PROPERTIES FOR 6061 AND 2024 ALUMINUM ALLOYS Suhair Ghazi Hussein, Mohsin Abdullah Al-Shammari, Ayad M. Takhakh, Muhannad Al-Waily |
|
48-66 |
| 6 | ALE SEAMLESS IMMERSED BOUNDARY METHOD WITH OVERSET GRID SYSTEM ADAPTED TO THE SHAPE OF AN OBJECT A. Urano, K. Tajiri1, M. Tanaka, M. Yamakawa & H. Nishida |
|
67-75 |
| 7 | DRAG REDUCTION CHARACTERISTIC OF SEAWEED FIBER SOLUTION IN ROUND AND SPIRAL PIPE Yanuar, Gunawan & Winda Wulandari |
|
76-84 |
| 8 | NUMERICAL OPTIMIZATION OF BAFFLE DESIGN IN A PARALLEL HEAT EXCHANGER HEADER USING CFD AND GENETIC ALGORITHM Nguyen Ba Chien, Nguyen Dinh Vinh, Vu Huy Khue & Jong-Taek Oh |
|
85-90 |
| 9 | CHANGING THE HEAT FLOW IN THE STACK OF LOOP-TUBE TYPE THERMOACOUSTIC SYSTEM USING A HEAT PHASE ADJUSTER K. Shiraki†, S. Sakamoto, Y Kurata & Y. Watanabe |
|
91-99 |
| 10 | STUDY ON MOISTURE STACK FOR LOW-TEMPERATURE – OSCILLATION OF THERMOACOUSTIC SYSTEM-EFFECTS OF STACK LENGTH ON OSCILLATION TEMPERATURE AND SOUND PRESSURE – Daichi Kuroki, Shin-ichi Sakamoto, Riku Onishi, Yuto Kawashima, Yuya Kurata, Kazuki Shiraki, & Yoshiaki Watanabe |
|
100-104 |
| 11 | SEAMLESS IMMERSED BOUNDARY METHOD FOR FLOW SIMULATION WITH HEAT TRANSFER ON DUAL-RESOLUTION GRID K. Tajiri, M. Tanaka, M. Yamakawa & H. Nishida |
|
105-112 |
| 12 | IMMERSED BOUNDARY METHOD WITH PRESSURE BOUNDARY CONDITION FOR MOVING OBJECT OF INFINITESIMAL THICKNESS Y. Okahashi, K. Tajiri, M. Tanaka, M. Yamakawa & H. Nishida |
|
113-126 |
| 13 | STUDY ON RECYCLABILITY OF GRAPHITE CUTTING CHIPS AS CONDUCTIVE FILLERS A. Yoneshima, N. Oya & K. Sugiura |
|
127-134 |
| 14 | MODELLING OF DRYING IN PACKED BED BY SUPER HEATED STEAM Thi Thu Hang Tran |
|
135-142 |
| 15 | EXPERIENTIAL ANALYSIS OF MECHANICAL PROPERTIES AND STRAIN ENERGY OF EPOXY/MICRO FILLER CU-NI COMPOSITE Salwa A. Abed, Ahmad A. Khalaf & Thaer G. Shaalan |
|
143-150 |
| 16 | ANALYZING THE RELATIONSHIP BETWEEN THE ROAD SURFACE ROUGHNESS AND VERTICAL LOADING ON AUTOMOTIVE WHEELS Thanh Quang Nguyen |
|
151-159 |
| 17 | MODELING OF SUPERHEATED STEAM DRYING OF WOOD PARTICLES K.H. Le, T. T. H. Tran, A. Kharaghani, E. Tsotsas |
|
160-170 |
| 18 | HEAT TRANSFER PERFOMANCE OF UNDERGROUND U-TYPE HEAT EXCHANGER: A CFD MODEL-BASED ANALYSIS Van Hien Ngo, Kieu Hiep Le, Gia Diem Pham, Van He Ngo, Tien Anh Nguyen, Quoc Bao Nguyen, Tien Cong Do, Quyet Hung Vu, & Van Thuan Nguyen |
|
171-179 |
| 19 | EXPERIMENTAL STUDY ON PERFORMANCE AND EMISSIONS OF A DIESEL ENGINE USING ETHANOL AND BIODIESEL BLENDED DIESEL FUELS Pham Huu Tuyen and Pham Minh Tuan, & Nguyen Van Nhinh |
|
180-189 |
| 20 | ENERGY CONVERSION IMPROVEMENT BY HEATING THE CENTER OF A STACK IN A STANDING-WAVE THERMOACOUSTIC-SYSTEM Y. Kawashima, S. Sakamoto, R. Onishi, D. Kuroki, & Y. Watanabe |
|
190-196 |
| 21 | STUDY ON RESONANCE CONTROL BY LOCALLY EXPANDING THE OUTER TUBE IN A COAXIAL THERMOACOUSTIC SYSTEM Riku Onishi, Shin-ichi Sakamoto, Yuto Kawashima, Daichi Kuroki, Yukihiro Takeyama, and Yoshiaki Watanabe |
|
197-203 |
| 22 | A STUDY DETERMINING PRESSURE OF TIGHT-FIT CLOTHING ON HUMAN BODY BY EXPERIMENTAL MEASURING AND NUMERICAL SIMULATIOL METHOD Phan Thanh Thao, & Nguyen Quoc Toan |
|
204-216 |
| 23 | EXPERIMENTAL INVESTIGATION OF COMBUSTION CHARACTERISTICS OF WOODY BIOMASS GROWN IN VIETNAM Q. Wang , J. Hedner |
|
217-227 |
| 24 | PREPARATION AND CHARACTERIZATION OF SILICA-FIBER / AEROGER COMPOSITE HEAT INSULATIONS S. Kawaoka, N. Oya, & K. Sugiura |
|
228-234 |
| 25 | EXPERIMENTAL STUDY ON LOOP HEAT PIPE UNDER HORIZONTAL CONDITION WITH DIFFERENT WORKING FLUIDS Kyaw Zin Htoo, Phuoc Hien Huynh, Keishi Kariya and Akio Miyara |
|
235-245 |
| 26 | A KINETIC MODEL FOR PREDICTING TEMPERATURE IN MODIFIER ATMOSPHERE PACKAGING (MAP) FOR HUNG YEN LONGAN Ho Huu Phung, Nguyen Viet Dung, Nguyen Thi Minh Nguyet, & Nguyen Thi Hue |
|
246-253 |
| 27 | THERMALHYDRAULICS ANALYSIS OF FIXED BED NUCLEAR REACTOR IN SOME DIFFERENT CONFIGURATIONS Dinh Van Thin & Nguyen Dang Tai |
|
254-263 |
| 28 | ESTIMATION RESISTANCE OF AN EXPLORER SUBMARINE Tuan Phan Anh, Quang Vu Thanh, He Ngo Van, Quang Le, & Huong Pham Thi Thanh |
|
264-271 |
| 29 | THE EFFECTS OF COMBUSTION DURATION ON ENGINE EMISSION CHARACTERISTICS Nguyen Anh Ngoc, Nguyen Xuan Khoa & Chu Duc Hung |
|
272-277 |
| 30 | NUMERICAL INVESTIGATIONS OF GROUND EFFECT OF HELICOPTER UAV FOR AGRICULTURE APPLICATION K. P. Nguyen, D. T. K. Hoang, & K. N. Tran |
|
278-287 |
| 31 | THE EFFECT OF MGO & TIO2 ON WEAR BEHAVIOR OF COMPOSITE MATERIAL Khansaa D.Salman & Haider H.Abbas |
|
288-297 |
| 32 | NUMERICAL ANALYSIS OF AN ADVANCED VAPOR CHAMBER-HEAT SINK DESIGN EMBEDDED WITH PCM Amged Al Ezzi1, Mohammed Jawad Moahmmed & Mahmoud Mustafa Mahdi |
|
298-312 |
| 33 | A STUDY ON COOLING AND DEHUMIDIFICATION PROCESS OF A HEAT PUMP DRYING SYSTEM AT LOW TEMPERATURE Hoang Ngoc Hieu, Nguyen Van Dua, Vu Tuan Anh & Trinh Quoc Dung |
|
313-320 |
| 34 | NUMERICAL ANALYSIS OF CRITICAL REYNOLDS NUMBER OF WAVY TAYLOR VORTEX FLOW WITH CHANGING ASPECT RATIO H. Furukawa, T. Watanabe & Y. Toya |
|
321-330 |
| 35 | INTERACTIONS BETWEEN LARGE SOLID PARTICLES AND HOMOGENEOUS SHEAR TURBULENCE M. Tokuyama, M. Tanaka, K. Tajiri, H. Nishida & M. Yamakawa |
|
331-341 |
| 36 | STUDY ON BEHAVIOR AND BREAKUP PROCESS OF OIL JET EJECTED FROM CURVED PIPE G. Nitta, A. Nakashima, K. Mimura, K. Nishida, H. Hongou, H. Yokohata & Y. Ogata |
|
342-350 |
| 37 | NUMERICAL EVALUATION ABOUT SPECTRAL REFLECTION PROPERTIES OF SOLAR COLLECTOR WITH MICROSTRUCTURE S. Kinoshita, K. Kageyama,A. Yoshida |
|
351-357 |
| 38 | EFFECT OF USING DIFFERENT WELDING CURRENTS AND DISTRIBUTED HEAT FLUXES ON THE GEOMETRICAL WELD BEAD CHARACTERISTICS Salah Sabeeh Abed Al Kareem |
|
358-368 |
| 39 | SDYNAMIC SYSTEM IDENTIFICATION FOR ROBOT-ASSISTED TRANSCRANIAL MAGNETIC STIMULATION Paramin Neranon |
|
369-381 |
| 40 | EROSIONS- CORROSION BEHAVIOR OF (AL-Y2O3) COMPOSITE PREPARED BY POWDER METALLURGY Baraa H. Al khaqani, Nawal Mohammed Dawood & Osamah Ihsan Ali |
|
382-392 |