| No | Content | Download | Pages |
|---|---|---|---|
| 1 | STUDY ON USE OF DREDGING MATERIALS IN HAI PHONG NAVIGATIONAL ACCESS CHANNEL FOR CONSTRUCTION OF INFRASTRUCTURE AND PROTECTING THE ENVIRONMENT IN HAI PHONG PORT Long Giang Tran |
 |
1-10 |
| 2 | DEVELOPMENT OF SELF-MANAGEMENT WATER SEPARATOR FOR PEFC Y. Yanagisawa & K. Sugiura |
|
11-19 |
| 3 | EVALUATION OF CELL PERFORMANCE OF MEA FOR PEFC USING INKJET COATING PRINTER K. Morioka & K. Sugiura |
|
20-29 |
| 4 | ELUCIDATION OF DEGRADATION FACTOR DISTRIBUTION BY THE IMPROVED DIAGNOSTICS Y. Takeuchi, K. Sugiura, Y. Yoshitani, K. Kumano & T. Murakami |
|
30-39 |
| 5 | DRILLABILITY OF TITANIUM 6246 FROM CHIPS FORMATION PERSPECTIVE Mahros Darsin |
|
40-48 |
| 6 | INVESTIGATION OF SOME MECHANICAL PROPERTIES OF TERNARY POLYMER BLENDS BASED ON POLYPROPYLENE Sihama Issa Salih, Wafaa Mahdi Salih & Teeb Adnan Mohameed |
|
49-60 |
| 7 | DEVELOPMENT OF MECHANICAL DESIGN OF THE AMPHIBIOUS ROBOT Muhannad Zaidan Khalefa Iman S. Kareem & Rand Jaffer Jadoau |
|
61-73 |
| 8 | INDUSTRIAL PICKING AND PACKING PROBLEM: LOGISTIC MANAGEMENT FOR PRODUCTS EXPEDITION Huthaifa Al-Khazraji, Sohaib Khlil & Zina Alabacy |
|
74-80 |
| 9 | COMPARING RANGE OF MOTION BETWEEN FEMALES AND MALES WITHIN INTERVERTEBRAL LEVELS OF LUMBAR SEGMENT Raed A.M Al-Mamoori, Hayder Saad Oleiwi & Amer Adil Abdulkareem |
|
81-88 |
| 10 | EMPIRICAL MODEL FOR SURFACE ROUGHNESS IN HARD MILLING OF AISI H13 STEEL UNDER NANOFLUID-MQL CONDITION BASED ON ANALYSIS OF CUTTING PARAMETERS The-Vinh Do |
|
89-94 |
| 11 | EFFORT AT USING 20% BIODIESEL IN IC ENGINES: A STUDY WITH ENHANCED INTAKE PRESSURE AND DIFFERENT INJECTOR NOZZLE CONFIGURATIONS Ravinarayan Bhat, Sudesh Bekal |
|
95-108 |
| 12 | SURFACE ROUGHNESS PREDICTION IN ROTARY ULTRASONIC MACHINING OF ZIRCONIA DENTAL CERAMIC USING RSM M.H AlKawaz, M.S. Kasim and R. Izamshah |
|
109-115 |
| 13 | EXPERIMENTAL STUDY OF FORCED HEAT CONVECTION THROUGH A VERTICAL POROUS ANNULI Mustafa Fouad Yousif, Saad Najeeb Shehab,Hayder Mohammed Jaffal |
|
116-126 |
| 14 | DYNAMIC ANALYSIS AND MULTI-OBJECTIVE OPTIMIZATION OF SLIDER-CRANK MECHANISM FOR AN INNOVATIVE FRUIT AND VEGETABLE WASHER Nguyen T. T. Nga, Dang H. Minh, Nguyen T. M. Hanh, Phung V. Binh, Bui V. Phuong, Duc VN |
|
127-143 |
| 15 | A SHORT REVIEW AND DEVELOPMENT OF ROPE BRAKE DYNAMOMETER FOR MEASUREMENT OF BRAKE POWER ON SMALL SCALE ENGINE Fajri Vidian, Deli Huda Putra & Abdul Kholis |
|
144-153 |
| 16 | MICROSTRUCTURAL EVALUATION FOR TIG WELDING OF AA6061-T6 USING ER5356 FILLER METAL; IN POSTWELD AND AS-WELD TREATMENT Badr Kamoon, Salam Abeed Dahe,Zuhair H. Obaid |
|
154-164 |
| 17 | EMG – BASED FORCE ESTIMATION FOR DYNAMIC MUSCLE CONTRACTIONS IN PHYSICAL HUMAN-ROBOT INTERACTION K.H. Le, T. T. H. Tran, A. Kharaghani, E. Tsotsas |
|
165-177 |
| 18 | STRENGTH CHARACTERISTICS OF POLYESTER FILLED WITH RECYCLED GFRP WASTE Ehsan Sabah Al-Ameen, Jaafar Jaber Abdulhameed, Fadhel Abbas Abdulla, Ahmed Ali Farhan Ogaili & Muhanad Nazar Mustafa Al-Sabbagh |
|
178-185 |
| 19 | STUDY OF ORIFICE FLOW METERING FOR SCADA IN COMPACT NATURAL GAS REGULATOR STATIONS Ghandi Rouainia, Mounira Rouainia, Abderrezak Metatla |
|
186-195 |
| 20 | STUDY THE EFFECT OF BAUXITE CERAMIC POWDER ON THE FRACTURE MECHANICS OF ALUMINUM ALLOY USING DIGITAL IMAGE CORRELATION Mohsin A. Aswad, Samir Hamid Awad, & Ali Hussein Kaayem |
|
196-206 |
| 21 | HEAT FLUX AND VOLTAGE EFFECTS ON TRAPEZOIDAL MICROCHANNEL ELECTROOSMOTIC FLOW Ahmed Jassim Shkarah |
|
207-217 |
| 22 | IMPROVEMENT OF CORROSION RESISTANCE OF ALUMINUM – BRONZE ALLOYS IN (3.5%NACL AND 2M HCL) SOLUTIONS BY INDIUM ADDITIONS Haydar H.J. Jamal Al-Deen |
|
218-225 |
| 23 | MICRO-HYDRODYNAMIC INTERACTION MECHANISMS IN TIO2 NANO-COLLOIDAL SUSPENSIONS WITH DIFFERENT PARTICLE SIZE DISTRIBUTIONS: THE EFFECTS OF ELECTROSTATIC AND STERIC STABILIZATION Layth Al-Gebory , Hanaa A. Al-kaisy & Mervit mahdi |
|
226-238 |
| 24 | THE MECHANICAL PROPERTIES OF GREEN CEMENT MORTAR DIP-COATED WITH POLYURETHANE POLYMER Shatha R. Ahmed, Mena F. Khdheer & Aseel B. Al-Zubaidi |
|
239-246 |
| 25 | MECHANICAL PROPERTIES OF CHOPPED E-GLASS FIBER REINFORCED EPOXY RESIN Ethar Mohamed Mahdi Mubarak, Rawaa Hamid Mohammed Al-Kalali, Emad Ali Husein & Bahaa Sami Mahdi |
|
247-256 |
| 26 | AN ASSESSMENT STUDY ON THE QUALITY OF NI-CR COATING BEFORE AND AFTER HEAT TREATMENT Dinh Tuyen Nguyen & Hung Chien Do |
|
257-266 |
| 27 | COMPARATIVE STUDY OF MECHANICAL PROPERTIES AND WATER ABSORPTION OF HYBRID UNSATURATED POLYESTER COMPOSITE REINFORCED BY CINNAMON STICKS AND BANANA PEEL POWDER WITH JUTE FIBER Reem Alaa Mohammed & Marwah Subhi Attallah |
|
267-283 |
| 28 | QUALITATIVE RISK ASSESSMENT OF COMBINED CYCLE POWER PLANT USING HAZARDS IDENTIFICATION TECHNIQUE Iman Q. Al Saffar & Akram W. Ezzat |
|
284-293 |
| 29 | EXPERIMENTAL ANALYSIS OF CRACKED TURBINE ROTOR SHAFT USING VIBRATION MEASUREMENTS Hussein I. Mansoor, Mohsin Abdullah Al-shammari and Amjad Al-Hamood |
|
294-304 |
| 30 | EXPERIMENTAL INVESTIGATION AND OPTIMIZATION OF SURFACE GRINDING OF SPHEROIDAL GRAPHITE CAST IRON USING RESPONSE SURFACE METHODOLOGY C S Sumesh, Harikrishna S, Harikrishnan S Nair, Mahesh V, & Ramkumar R |
|
305-321 |
| 31 | STUDY OF HULLFORM LOW WASH CATAMARAN WATER BUS DESIGN TO SUPPORT TRANSPORTATION NEEDS FROM SMALL ISLANDS Adi Kurniawan Yusim, Aulia Windyandari, Eko Julianto Sasono, Hartono & Ahmad Fauzan Zakki |
|
322-335 |
| 32 | INVESTIGATION OF THE FILLER-SHAPE EFFECT ON THE HYDROPHOBICITY AND TRANSPARENCY OF MULTILAYER NANOCOMPOSITE COATING Ammar Emad Al-kawaz, Firas J. Hmood, Zainab M. Mohmmed & Ali Amer |
|
336-342 |
| 33 | OPTIMIZATION OF MATERIAL TO IMPROVE THE PERFORMANCE HEAT TRANSFER IN AIR CONDITION CONDENSER Ali Salh Sawadi, Luay Muhammed Ali & Riyad Jassim Tilefih |
|
343-348 |
| 34 | STATIC AEROELASTIC APPROACH BASED ON VORTEX LATTICE METHOD AND EULER-BERNOULLI BEAM THEORY FOR STRUCTURAL ANALYSIS OF FIXED WING SUAS Esteban A. Valencia, Alexander F. Ramos, Víctor H. Alulema & Darío A. Rodríguez |
|
349-360 |
| 35 | COMPARATIVE ANALYSIS OF KINEMATIC REDUNDANCY RESOLUTION TECHNIQUES IN CASE OF HIERARCHICAL TASKS Amine Abou Moughlbay & Mohamad Kanaan |
|
361-370 |
| 36 | NUMERICAL AND EXPERIMENTAL CHARACTERIZATION OF COMPOSITE LEAF SPRING SUBJECTED TO BENDING Howida Mohamed, Mohamed F. Aly & Abdallah Shokry |
|
371-383 |
| 37 | WORKING FEATURES EVALUATION OF THE DIESEL ENGINE LUBRICATED WITH BLENDS OF RENEWABLE CORN OIL AND CARBON NANOTUBES Hussain Saad Abd, Abdulmunem R. Abdulmunem, Mohammed Hassan Jabal, Pakharuddin Mohd Samin & Hasimah Abdul Rahman |
|
384-395 |
| 38 | EXPERIMENTAL ASSESSMENT OF THE PERFORMANCE AND EXHAUST EMISSIONS CHARACTERISTIC OF A DIESEL WITH JATROPA CURCAS-CEIBA PENTANDRA MIXTURE BIODIESEL/BIOETHANOL BLENDS Joko Sutrisno, S. Dharma, A. S. Silitonga, A. H. Shamsuddin, A. H. Sebayang,Jassinnee Milano, Rahmawaty, Supriyanto |
|
396-412 |
| 39 | FINITE ELEMENT ANALYSIS OF HEAT FLOW AND TEMPERATURE DISTRIBUTION INSIDE CUTTING TOOL Suhair G. Hussein & Mohammad Qasim Abdullah |
|
413-421 |
| 40 | THE POTENTIAL OF ARTIFICIAL NEURAL NETWORK (ANN) TECHNIQUE IN PHOTOVOLTAIC POWER OUTPUT MODELING BASED ON METEOROLOGICAL DATA Rusul S. Hadi, Osamah F. Abdulateef |
|
422-429 |