| No | Content | Download | Pages |
|---|---|---|---|
| 1 | METAL-CERAMIC COMPOSITE TO IMPROVE WEAR RESISTANCE OF ALUMINUM ALLOYS SURFACE BY NANOCERAMIC ELECTROPLATING Talib Abdulameer Jasim, Sattar Hantosh A. Alfatlawi, Baha Sami Mahdi |
 |
1-7 |
| 2 | ANALYTICAL STUDY OF THE ECONOMIC FEASIBILITY OF WASTE INCINERATOR INVESTMENT TO GENERATE ELECTRICITY FOR DIJLAH UNIVERSITY COLLEGE IN BAGHDAD Hamzah D Alobaidi, Mohammed H Alobaidi Zaid Ali Hussain |
|
8-16 |
| 3 | A VISUALIZATION LOW SPEED SUBSONIC WIND TUNNEL DESIGN AND CONSTRUCTION FOR LABORATORY APPLICATION AND USES Ahmed Adnan Shandookh, Salman H. Omran & Laith Jaafer Habeeb |
|
17-28 |
| 4 | OPTIMIZATION AND MODELING OF OXIDATION PROCESS PARAMETERS OF Α-BRASS ALLOY Muna Khethier Abbas, Muntaha Kudair Abbas |
|
29-39 |
| 5 | INVESTIGATING DIFFERENT TYPES OF BEARING ON THE PERFORMANCE AND OPERATION OF EVAPORATIVE COOLER Omar Alaa Ihsan, Shaker S. Hassan, Ahmed Adnan Shandookh |
|
40-56 |
| 6 | AN ENGINEERED AMELIORATION AND SUSTAINABILITY ENHANCEMENT TECHNIQUE FOR PERFORMANCE UPGRADING OF A MECHANICAL SYSTEM Mohammed Hasan Mustafa |
|
57-64 |
| 7 | IMPACT OF THE NOZZLE ANGLES, DISTANCE BETWEEN BURNERS, AND N2 ON BURNING VELOCITY FOR PREMIXED COUNTER FLAME Fouad A. Saleh, Salwa Tariq Omar |
|
65-79 |
| 8 | EFFECT OF ND-YAG LASER PULSES ON MECHANICAL PROPERTIES OF CARBONTRIDING STEEL TYPE (AISI 1006) Ansam A. Aziz, Enas A. Khalid, Abbas S. Alwan |
|
80-88 |
| 9 | A SIMULATION RESEARCH OF HEAT TRANSFERS AND CHEMICAL REACTIONS IN THE FUEL STEAM REFORMER USING EXHAUST GAS ENERGY FROM MOTORCYCLE ENGINE Minh Quang Chau, Van Vang Le, Anh Tuan Hoang, Abdel Rahman M. S Al-Tawaha, Van Viet Pham |
|
89-102 |
| 10 | A STUDY ON THE EFFECT OF TECHNOLOGY PARAMETERS ON 3D GEOMETRIC SURFACE PARAMETERS IN BALL-END MILLING PROCESS
This paper has been retracted due to there is a conflict of result between authors Minh Quang Chau, Danh Chan Nguyen, Dinh Tuyen Nguyen |
|
103-121 |
| 11 | PARAMETERS AFFECTING FIBER QUALITY AND PRODUCTIVITY OF COIR SPINNING MACHINES Anh Tuan Hoang, Minh Quang Chau, Quang Binh Le |
|
122-145 |
| 12 | AN EXPERIMENTAL STUDY TO EVALUATE THE MECHANICAL PROPERTIES AND DURABILITY OF FROZEN CAR BODY WALLS USING COMPOSITE POLYESTER – FIBERGLASS WITH SANDWICH STRUCTURE Minh Quang Chau, Cao Nguyen Khang Chau, Xuan Khoa Huynh |
|
146-160 |
| 13 | STUDY THE EFFECT OF NANO FLUID ON HEAT TRANSFER IN FINNED PIPE WITH INTERNAL V-CUT TWISTED TAPE Mowafaq Shyaa Alwan, Jinan Mahdi Hadi, Laith Habeeb Jaafer, Humam Kareem Jalghaf |
|
161-177 |
| 14 | TRIBOLOGICAL CHARACTERIZATION OF 7025/TIO2 NANOCOMPOSITE AT A VARIOUS AMOUNT OF NANOREINFORCEMENT Asaad Khudhair Hamzah, Talib Abdulameer Jasim, Bahaa Sami Mahdi, & Hussain J.M. Al-Alkawi |
|
178-184 |
| 15 | COMPARISON STUDY OF FUEL CONSUMPTION AND EMISSIONS OF HEVS AND CONVENTIONAL VEHICLE IN IRAQ USING REAL-WORLD CYCLE Loay M. Mubarak, Ahmed Al-Samari, Dhia A. Alazawi, Marwa Fadel |
|
185-203 |
| 16 | HEAT TRANSFER AUGMENTATION IN AN INCLINED TUBE USING PERFORATED CONICAL RING INSERTS Akeel Abdullah Mohammed, Ansam Adel Mohammed, Luay Abdulmuttaleb Sadeq |
|
204-217 |
| 17 | THERMAL EFFECTS OF USING VARIOUS METAL DISKS INSIDE LIQUID-PCM THERMAL STORAGE SYSTEM Maathe A. Theeb, Mohammed H. Alhamdo and Raid S. Fahad |
|
218-230 |
| 18 | HEAT TREATMENT EFFECT ON CARBON STEEL CORROSION RESISTANCE AT DIFFERENT CARBON CONTENT Katea Luaibi Hamid, Nader Majed Moustafa, Amer Fadhel Noori |
|
231-237 |
| 19 | INVESTIGATE POLYACRYLONITRILE NANOTUBE CARBON PROPERTIES FIBERS Sabah Mahdi Salah, Ahmed Qays Abdullah |
|
238-245 |
| 20 | NUMERICAL STUDY OF NATURAL CONVECTION FROM A HORIZONTAL CYLINDER WITH DIFFERENT CROSS SECTIONS Emad Esmaael Habib |
|
246-259 |
| 21 | NUMERICAL METHOD FOR FINDING THE BALANCING AND UNBALANCING FORCES OF SINGLE PISTON ENGINE Muslim Ali, Iqbal Alshalal, Arshad Abdula Rashed, Z. C. Feng |
|
260-271 |
| 22 | EFFECT OF NANO-FLUID AND MAGNETIC FIELD ON THE HEAT TRANSFER Nazar Yasir Jasim, Noora Saleh Ekaab, Tamadher Mustafa Abbas Alnasser, Laith Jaafer Habeeb |
|
272-282 |
| 23 | NUMERICAL STUDY OF HEAT TRANSFER ENHANCEMENT IN CONTOUR CORRUGATED CHANNEL USING NANOFLUID AND ENGINE OIL Naseer Dawood khata, Zena Khalefa Kadim, Kamil Abdulhussein Khalaf |
|
283-294 |
| 24 | NUMERICAL INVESTIGATION FOR THE DISCHARGING PROCESS IN COLD-WATER STORAGE TANK Hayder Abed Dhahad, Wissam H. Alaweea, Laith Jaafer Habeeb |
|
295-306 |
| 25 | ENHANCEMENT THE PERFORMANCE OF COMPRESSION REFRIGERATION CYCLE BY COOLING CONDENSER AIR IN HOT CLIMATE Faez Abid Muslim Abd Ali, Muwafaq Sh. Alwan, Laith Jaafer Habeeb, Humam Kareem Jalghaf |
|
307-317 |
| 26 | COMPUTATIONAL INVESTIGATION ON FREE AND FORCED CONVECTION INSIDE AN ENCLOSURE Ali Abd Al-Nabi Abaas, Hasanen Mohammed Hussain, Ali Najim Abdullah Saieed, Laith Jaafer Habeeb, Humam Kareem Jalghaf |
|
318-331 |
| 27 | THREE DIMENSIONAL STUDY OF BAFFLES EFFECT ON HEAT TRANSFER IN SHELL AND TUBE HEAT EXCHANGER Muna S. Kassim, Ahmed Oleiwi, Dhamyaa Saad Khudhur, Laith Jaafer Habeeb |
|
332-345 |
| 28 | NUMERICAL ANALYSIS OF NOSE SHAPE ON THE AERODYNAMIC CHARACTERISTICS OF ROCKET Muna S. Kassim, Firas A. Abbas, Israa Ali Abdulghafar, Laith Jaafer Habeeb |
|
346-354 |
| 29 | THERMAL PERFORMANCE IMPROVEMENT OF DOUBLE PASS SOLAR AIR HEATER Ameer Resen Kalash, Sameera Sadey Shijer, Laith Jaafer Habeeb |
|
355-372 |
| 30 | PLURAL GENETIC ALGORITHMS APPROACH TO CONTROL AGRICULTURAL MECHANIZATION AND WHEAT PRODUCTION Yousif Y. Hilal, Raqeeb Hummadi Rajab, Arkan M. A. Seddiq |
|
373-383 |
| 31 | FATIGUE CHARACTERIZATION OF LAMINATED COMPOSITES USED IN PROSTHETIC SOCKETS MANUFACTURING Ehab N. Abbas, Muhsin J. Jweeg, Muhannad Al-Waily |
|
384-399 |
| 32 | DESIGN OF HYBRID CONTROLLER FOR THE TRAJECTORY TRACKING OF WHEELED MOBILE ROBOT WITH MECANUM WHEELS Sameh F. Hasan, Hassan M. Alwan |
|
400-414 |
| 33 | NUMERICAL AND EXPERIMENTAL ANALYSIS OF CRACKED CANTILEVER BEAM UNDER FREE VIBRATION Ali A. Al-Saffar, Raghad Azeez Neamah, Luay S. Alansari |
|
415-427 |
| 34 | MEASUREMENT OF ABSORBED ENERGY OF THE POLYLACTIC ACID (PLA) VIA NUMERICAL SIMULATION Ali Jasim Mohammed Al-Behadili, Bashar Owaid. Bedaiwi |
|
428-435 |
| 35 | NUMERICAL INVESTIGATION FOR NATURAL VENTILATION ENHANCEMENT IN DIFFERENT MODELS OF SOLAR CHIMNEY INSIDE A ROOM ELICITED FROM THE CONCEPTS OF THE CONVENTIONAL CHIMNEY MODEL Hisham S. Hashim, Muna S. Kassim, Husam H. Kadhim |
|
436-450 |
| 36 | KINEMATICS MODELING AND SIMULATION OF HOLONOMIC WHEELED MOBILE ROBOT WITH MECANUM WHEELS Hassan M. Alwan |
|
451-459 |
| 37 | COMPUTATIONAL FLUID DYNAMIC ANALYSIS OF BLOOD FLOW INTO NORMAL RIGHT CORONARY ARTERY IN DIFFERENT PATIENTS Rafid M. Hannun, Saba J.Muhseen |
|
460-471 |
| 38 | FREE VIBRATION OF SKEW ISOTROPIC PLATE USING ANSYS Faeq H. Gburi, Luay S. Al-Ansari, Mohannad A. Khadom, Ali A. Al-Saffar |
|
472-486 |
| 39 | EVALUATION OF HIGH STRENGTH SELF-COMPACTING CEMENTITIOUS COMPOSITE MADE WITH DIFFERENT TYPES OF STEEL FIBER Nguyen Viet Duc, Minh DH |
|
487-493 |
| 40 | THERMAL ANALYSIS OF VERTICAL FLOW OF STEAM THROUGH A POROUS MEDIA Asaad Salim Bded, Shaheed Mahdi Talib, Farhan Lafta Rashid |
|
494-503 |