Vol. 39, No. 1 (2016) (1)

The Research of High Precision and Big Area Two-Dimensional Laser Controlling Reflection Platform

L. T. Xue †‡*, X. D. Han †, H. K. Wang †, T. Chen †, F. Y. Li §, A. B. Zoss ††

† Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sicences, Changchun l30033, China
‡ University of Chinese Academy of Sciences, Beijing 100049, China
§ Yonsei University, Seoul, Korea
†† Mechanical Engineering department, University of California, Berkeley, CA, USA

Cite this paper
L. T. Xue, X. D. Han, H. K. Wang, T. Chen, F. Y. Li, A. B. Zoss, “The Research of High Precision and Big Area Two-Dimensional Laser Controlling Reflection Platform”, Journal of Mechanical Engineering Research and Developments, vol. 39, no. 1, pp. 1-10, 2016. DOI: 10.7508/jmerd.2016.01.001

ABSTRACT: Laser mirror optical system commonly used in the structure, mirror with two-dimensional motion function is the laser beam direction accurately control the necessary parts of the system. The collimation characteristics of laser beam is applied to the far distance interference decision must have the very high accuracy laser reflection platform two-dimensional laser at the outlet of the control, in order to ensure the accuracy of the laser spot position in the. In addition, because the laser transmission characteristics of laser jamming equipment limitations at the outlet of the need to have a certain diameter, this needs to carry on expanding beam corresponding after the laser emission to the two-dimensional control platform and the final launch out. Therefore the development of two-dimensional with large target surface high accuracy control platform is one of the key technologies in the field of laser interference. With the development of a certain type of multi wavelength laser jamming equipment as the background, using UG software design, simulation analysis and experimental study on the detection methods such as having a two-dimensional laser reflection platform closed-loop control adjustment function. The platform effective laser reflector sizes up to 100mmX100mm. By the simulation and actual test out of the way of the positioning accuracy, fixed-point test repeatability and impact vibration test on the platform, the platform measured control accuracy better than 30 rad, and the adjusting range of the two directions are more than 1mrad. The conclusion can be obtained the target with precision adjustment function of laser reflection surface of two-dimensional control platform.

Keywords : Laser beam; Laser application; Photoelectric control; Platform design.

[1] M.R. Suite, H.R. Burris, C.I. Moore, et al., “Fast steering mirror implementation for reduction of focal-spot wander in a long-distance free-space communication link,” Proc. of SPIE, 2004, Vol. 5160:439-446.
[2] ZHANG L M, GUO J, “Simulative research on dual X-Y axis control of fast steering mirror,” Optics and Precision Engineering,2005(13):142-147. (in Chinese)
[3] Felix E. Morgan, Steven R. Wasson a, Jamison J. London, et al., “Large, high performance, fast steering mirrors with FPGA-embedded controls,” Proc. of SPIE, 2009, Vol. 7466:74660H1-74660H10.
[4] LING N,CHEN D H,GUAN CH L,et al., “Two-dimension piezoelectrical fast steering mirror,” Opto-Electric Enginnering,1995,22(1):51-60.(in Chinese)
[5] Francisc M. Tapos, Derek J. Edinger, Timothy R. Hilby, et al., “High bandwidth fast steering mirror,” SPIE, 2005, Vol. 587707:01-14.
[6] SHAO S,GAO Y G,GUO J,et al., “Design of two-dimensional fast-steering cooling mirror equipment,” Optics and Precision Engineering,2009,17(3):493-498.(in Chinese)
[7] Michael Sweeney, Gerald Rynkowski, Mehrdad Ketabchi, et al.. Design Considerations for Fast Steering Mirrors (FSMs). SPIE, 2002, Vol. 4773:63-73.
[8] ZHANG L M,GUO J,CHEN J, “Summary of the mechanic structure for fast-steering mirrors,” Ome Informtion,2005(3):21-24.(in Chinese)
[9] QIU X B, DOU L H, SHAN D SH, et al.. Design of active disturbance rejection controller for electro-optical tracking servo system. Optics and Precision Engineering,2010,18(1):220-226.(in Chinese)
[10] TANG T, HUANG Y M, FU CH Y, et al., “Acceleration feedback of a CCD-based tracking loop for fast steering mirror ,” Optical Engineering, 2009, 48(1): 013001
[11] WANG Y F, “Computer Aided Engineering Analysis and Calculation of the Light Weight Primary Mirror ,” Optics and Precision Engineering,1995,3(6):66-70.(in Chinese)
[12] Paul R.Yoder, Jr, “Opto-Mechanical Systems Design,” China Machine Press, 2006.