Vol. 39, No. 2 (2016) (20)

Design and Kinetic Study of a Class of Parallel Mechanisms with Three Degrees of Freedom

 Z. H. Zhang†*, C. Makowski‡

Mechanical Engineering department, Tianjin Vocational College of Mechanics and Electricity, Tianjin, 300350, China, 
‡Department of Geosciences, Florida Atlantic University, Boca Raton, FL 33431, U.S.A.

Cite this paper
Z. H. Zhang†*, C. Makowski‡, “Design and Kinetic Study of a Class of Parallel Mechanisms with Three Degrees of Freedom”, Journal of Mechanical Engineering Research and Developments, vol. 39, no. 2, pp. 433-440, 2016. DOI: 10.7508/jmerd.2016.02.020

ABSTRACT: Parallel mechanism has the advantages of great rigidity, high precision, strong load capacity, etc, combining with the needs of People’s daily production, limited-DOF parallel mechanism, with the advantages of simple structure, convenient production and installation and easy drive control, has become the focus that people concerned. This paper, focusing on the design of parallel mechanism with 3 degrees of freedom (DOF), has carried out researches on degree of freedom analysis, kinematics analysis and simulation platform design. Firstly, the structure of 3-PSP parallel mechanism and the specific distribution of degree of freedom have been analyzed, and then the closed vector loop method and transformation matrix are used to get the inverse solution and positive solution of inverse solution of kinematics and positive solutions are obtained kinematics and positive solutions are obtained, finally, three-dimensional simulation software is used to verify the expected result. It turns out that the simulation results and expected results are the same, providing guidance for subsequent experimental study.

Keywords : Parallel mechanism; DOF analysis; Simulation analysis.


[1] G. Liu, K. Y. Lee, and H. F. Jordan, “TDM and TWDM de Bruijn networks and shufflenets for optical communications”, IEEE Trans. Comp., vol. 46, no. 4, pp. 695-701, June 1997.
[2] Y. D. Xu, J. T. Yao, “Simple Method for Distinguishing Instantaneity of Mobility of the Overconstrained Parallel mechanism Based on the Geometric Constraint Conditions”, Journal of Mechanical Engineering, vol. 49, no. 5, pp. 10-16, May 2013.
[3] G. X. Wang, D. N. Yuan, “Kinematics Analysis of Spatial 4-SPS/CU Parallel Mechanism”, Transactions of the Chinese Society for Agricultural Machinery, vol. 43, no.3, pp. 207-212, March 2012.
[4] Y. Zhao, Z. Huang, “Force Analysis of Lower-mobility Parallel Mechanisms with Over-constrained Couples”, Journal of Mechanical Engineering, vol. 46, no.5, pp. 16-21, May 2010.
[5] Y. Lu, B. Hu, “Development evaluation of Limited-DOF parallel manipulators”, Journal of Yanshan University, vol. 35, no.5, pp. 378-384, May 2011.
[6] G. Abbasnejad, J. Yoon, H. Lee, “Optimum kinematic design of a planar cable-driven parallel robot with wrench-closure gait trajectory”, Mechanism and Machine Theory, vol. 99, no.3, pp. 1-18, March 2016.
[7] P. Huang, L. P. Wang, “Kinematic Performance and Accuracy Analysis of New Type 3-DOF Parallel Mechanism”, Journal of Mechanical Engineering, vol. 46, no.15, pp. 1-7, August 2010.
[8] Y. S. Zhao, Y. D. Xu, “A Force Analysis Method for Overconstrained Parallel Mechanism”, Chinese Journal of Mechanical Engineering, vol. 25, no.6, pp. 711-717, June 2014.
[9] S. G. Hu, Y. Cao, “Forward displacement analysis of asymmetrical 6/6-SPS Steward parallel manipulator”, Journal of Machine Design, vol. 27, no.12, pp. 57-61, December 2010.
[10] Y. J. Zhou, J. X. Zhang, “Mechanical analysis and kinematic simulation of a hydraulic support used in backfilling and the coal mining face”, Journal of China university of mining and technology, vol. 41, no.3, pp. 366-370, March 2012.