Vol. 41, No. 1 (2018) (16)

An Investigation on Corrosion Behaviour of Similar Friction Stir Welded Joints

Vuppula Prasanna†, A. Seshu Kumar‡, P. Ramesh Babu


†Department of Mechanical Engineering, CMR College of Engineering &Technology, Hyderabad, India 501401
‡Senior Principal Scientist & Head Engineering Services Division, Indian Institute of Chemical Technology, Habsiguda, Hyderabad, India 500007
§Department of Mechanical Engineering, University College of Engineering, Osmania University, Hyderabad, India 500007
Cite this paper
Vuppula Prasanna, A. Seshu Kumar, and P. Ramesh Babu, “An Investigation on Corrosion Behaviour of Similar Friction Stir Welded Joints”, Journal of Mechanical Engineering Research and Developments, vol. 41, no. 1, pp. 136-141, 2018.  DOI: 10.7508/jmerd.2018.01.016

ABSTRACT: Salt spray or Salt fog test are commonly used and standardized method to test metal parts that will be exposed to marine conditions. Die cast Magnesium alloy plates of 3mm thick of AE42 grade are welded using advanced welding processes Friction Stir Welding (FSW). Mg alloys have received extensive recognition due to their excellent physical properties, including light weight, high strength/wt. ratio, high thermal conductivity and a good electromagnetic shielding characteristics, thus, become promising metal to replace steel and Aluminium alloys many structural and Mechanical applications due to their attractive mechanical and Metallurgical properties. The application of magnesium alloys used in automobile – Sport car wheels. From this research work, it is found that, in salt spray corrosion test, low corrosion rate is found at low concentrated solution and longer exposure time, and the corrosion morphology is predominantly influenced by the distribution of β- phase. This result shows the usage of the magnesium alloy for best environment and suitable applications from the aforementioned conditions.

Keywords : Corrosion studies; Magnesium alloy; AE42; Similar; and Salt spray test.