| No | Content | Download | Pages |
|---|---|---|---|
| 1 | DYNAMIC CRACK PROPAGATION IN THIN PLATES UNDER CYCLING THERMAL STRESSES EFFECT WITH CYCLING IMPACT LOADING Bassam Ali Ahmed, Fathi Abdulsahib Alshamma |
 |
1-11 |
| 2 | REVIEW ON MIXED CONVECTIVE HEAT TRANSFER IN DIFFERENT GEOMETRIES OF CAVITY WITH LID DRIVEN Mustafa Abdul Salam Mustafa, Hasanen Mohammed Hussain, Auday Awad Abtan, Laith Jaafer Habeeb |
|
12-25 |
| 3 | TWO-PHASE FLOW FOR GAS-LIQUID, GAS-SOLID, LIQUID-SOLID, AND LIQUID-LIQUID IN A HORIZONTAL SMOOTH AND TURBULATOR CONDUIT – A REVIEW Hyder M. Abdul Hussein, Sabah Tarik Ahmed, Laith Jaafer Habeeb |
|
26-50 |
| 4 | EXPERIMENTAL AND THEORETICAL COMPARISON BETWEEN METALLIC AND MIRROR REFLECTORS WITH DIFFERENT RECEIVER TANK Ihab Omar, Alaa Alrudhan, Karrar A. Hammoodi, Ameer mohammed ali |
|
51-61 |
| 5 | BOUYANCY DRIVEN IN AN INCLIND CIRCULAR ENCLOSURE WITH ELLIPTIC HEAT SOURCE Ali Najim Abdullah Saieed, Sanaa Turky Mousa Al-Mousawe, Auday Awad Abtan, Laith Jaafer Habeeb |
|
62-74 |
| 6 | NUMERICAL SIMULATION OF FLOW AROUND THE SHIP USING CFD METHOD Ngoc Kien Vu, Hong Quang Nguyen |
|
75-86 |
| 7 | NOISE EFFECTS IN SKILL DISCRETION AND MODELING Ahmed Hameed Kaleel, Abdnoor Jameel Shaheed Al-hamadani, kareem jawad kadhim |
|
87-99 |
| 8 | NUMERICAL INVESTIGATION OF TURBULENT AIR FLOW CONVECTIVE HEAT TRANSFER THROUGH A TRAPEZOIDAL DUCT Salah Sabeeh Abed AlKareem, Ahmed Fakhrey Khudheyer, Faiz F. Mustafa |
|
100-108 |
| 9 | THE EFFECT OF DIFFERENT DESIGN PARAMETERS ON THE CYCLOID TEETH- STRAIGHT BEVEL GEAR BENDING STRESS Nassear Rasheid Hmoad, Tariq Mohammad Hammza, Aveen Ahmed Abdulkareem, Mohammad Qasim Abdullah |
|
109-118 |
| 10 | AXIOMATIC SIX SIGMA, A SIMULATION-BASED DECISION-MAKING FRAMEWORK Abdallah Ali Abdallah |
|
119-136 |
| 11 | FLUID STRUCTURE INTERACTION OF NON–RETURN VALVE USING CFD TECHNIQUE Emad Q. Hussein, Basim Raheem Sadeq, Farhan Lafta Rashid |
|
137-148 |
| 12 | INFLUENCE OF THE SOLID PARTICLES NANOFLUID ON THE DYNAMIC BEHAVIOUR OF ROTOR FLUID FILM JOURNAL BEARING SYSTEMS Tariq M. Hammza, Aveen A. Abdulkareem, Ehab N. Abas |
|
149-162 |
| 13 | OCCUPATIONAL NOISE AND ITS EFFECTS ON BAGHDAD AIRPORT WORKERS Kareem jawad kadhim, Ahmed Hameed Kaleel, Abdnoor Jameel Shaheed Al-hamadani |
|
163-169 |
| 14 | THE PREPARATION OF ALUMINIUM FOAM USING POWDER TECHNOLOGY FOR INDUSTRIAL APPLICATIONS Murtadha Mohsen Mottar Al-Masoudy, Luay Hashem Abbud, Hyder H. Balla |
|
170-179 |
| 15 | SAFETY FACTOR OF PUMP VIBRATIONS ON SHIPS BASED ON THE NATURAL FREQUENCY OF PUMP VIBRATIONS ACCORDING TO ISO 10816-3 Damora Rhakasywi, Amir Marasabessy, Mohammad Rusdy Hatuwe, Sjaiful Kotahatuhaha |
|
180-192 |
| 16 | REDUCE AROMATIC CONTENT USING PURE SOLVENTS IN MULTI-GRADES LUBRICANT OILS BY N-D-M METHOD Tahseen Hameed khlaif, Mohammed Thamer Jaafar, Asaad Salim Bded |
|
193-198 |
| 17 | STUDYING THE EFFECT OF FIBER ORIENTATION AND SKEW ANGLE ON THE FUNDAMENTAL FREQUENCIES OF SIMPLY SUPPORTED COMPOSITE PLATES USING FINITE ELEMENT METHOD Raghad Azeez Neamah, Zainab M. Shukur, Luay S. Al-Ansari, K. D. Dearn |
|
199-212 |
| 18 | IMPACT OF ADDING COW DUNG WITH DIFFERENT RATIOS ON ANAEROBIC CO-DIGESTION OF WASTE FOOD FOR BIOGAS PRODUCTION Fawziea M. Hussien, Ahmed J. Hamad, Johain J. Faraj |
|
213-221 |
| 19 | MODELING AND ANALYSIS OF DIFFERENT ANTIREFLECTION POLYMER COATING ON SILICON SOLAR CELL USING PC1D SOFTWARE Rafah Ibraheem Jabbar |
|
222-232 |
| 20 | EVALUATION OF SURFACE ROUGHNESS AND BIOLOGICAL BEHAVIOR OF TI-NB ALLOYS Fatimah J. Al-Hasani |
|
233-241 |
| 21 | A BRIEF REVIEW OF EMERGING TECHNOLOGY IN BALLAST WATER TREATMENT FOR SHIPS BUILDING IN VIETNAM Minh Hai Duong |
|
242-254 |
| 22 | NON-LINEAR PID CONTROLLER FOR TRAJECTORY TRACKING OF A DIFFERENTIAL DRIVE MOBILE ROBOT Umar Zangina, Salinda Buyamin, Mohamad Shukri Zainal Abidin, Mohd Saiful Azimi Mahmud, Hameedah Sahib Hasan |
|
255-270 |
| 23 | EFFECTS OF INTERNAL CONNECTING LAYER PROPERTIES ON THE VIBRATIONS OF DOUBLE BEAMS AT DIFFERENT BOUNDARY CONDITIONS Imad Abdulhussein Abdulsahib, Qasim abbas Atiyah |
|
271-278 |
| 24 | RECOVERY ENERGY RESIDUAL IN SERVO PNEUMATIC SYSTEMS BY USING PID CONTROLLER BASED ON PARTICLE SWARM OPTIMIZATION (PSO) Wisam Essmat Abdul-Lateef, Abdullah Faraj Huayier |
|
279-291 |
| 25 | EFFECTS OF GEOMETRICAL AND MATERIAL PROPERTIES ON VIBRATIONS OF DOUBLE BEAMS AT DIFFERENT BOUNDARY CONDITIONS Qasim abbas Atiyah, Imad Abdulhussein Abdulsahib |
|
292-307 |
| 26 | HEAT TRANSFER AUGMENTATION IN TUBE FITTED WITH ROTATING TWISTED TAPE INSERT Akeel Abdullah Mohammed,Ansam Adel Mohammed, Mortada Ahmed Falleh |
|
308-316 |
| 27 | THE INFLUENCE OF AMBIENT CONDITIONS ON COMPRESSION IGNITION ENGINE PERFORMANCE: (EXPERIMENTAL STUDY) Salah H. Abid Aun, Muthana L. Abdullah, Reyadh Ch. Al-Zuhairy |
|
317-325 |
| 28 | AN EXPERIMENTAL STUDY ON THE INFLUENCE OF FORCED VIBRATION ON LONGITUDINAL FINS HEAT SINK SUBJECTED TO FREE CONVECTION HEAT TRANSFER Mohammed Mousa Al-azzawi, Hasanen Mohammed Hussain, Laith Jaafer Habeeb |
|
326-339 |
| 29 | NATURAL CONVECTION HEAT TRANSFER IN HORIZONTAL ELLIPTIC CAVITY WITH ECCENTRIC CIRCULAR INNER CYLINDER Amer A. Mohammed, Sanaa Turki Mousa Al- Musawi, Sadoon K. Ayed, Aseel Alkhatat, Laith Jaafer Habeeb |
|
340-355 |
| 30 | REVIEW ON HEAT TRANSFER ENHANCEMENT IN CAVITY WITH LID DRIVEN Ali Najim Abdullah Saieed, Mustafa Abdul Salam Mustafa, Sadoon K. Ayed, Laith Jaafer Habeeb |
|
356-373 |
| 31 | ANALYSIS OF THE PROCESS PARAMETERS EFFECT ON THE THICKNESS DISTRIBUTION AND THINNING RATIO IN SINGLE POINT INCREMENTAL FORMING PROCESS Adil Sh. Jaber, Jalil J. Shukur, Waqass S. khudhir |
|
374-382 |
| 32 | DESIGN AND MANUFACTURING OF VERTICAL AXIS WIND TURBINES (VAWTS) WITH GATES AND CONTROL USING ARDUINO TECHNIQUE Rasha Qasim Humadi, Hind Hadi Abdulridha, Haydar Hadi Jaber |
|
383-388 |
| 33 | THE TRIBOLOGICAL BEHAVIOURS OF PEEK AND PEEK BASED COMPOSITES PEEK UNDER SLIDING CONTACT Zainab M. Shukur, K. D. Dearn |
|
389-405 |
| 34 | THE EFFECT OF RIB SIZE AND CONFIGURATION TOWARDS THE FLOW DIRECTION OF A TRIANGULAR DUCT ON ENHANCING HEAT TRANSFER FACTORS (PART 1: AN EXPERIMENTAL STUDY) Hafidh Hassan Mohammed, Wakkas Ali Rasheed, Nasr A. Jabbar, Luay S. Alansari |
|
406-421 |
| 35 | NUMERICAL SIMULATION OF PENT- ROOF COMBUSTION CHAMBER IN A SI ENGINE Mahmoud. A. Mashkour , Mustafa Hadi Ibraheem |
|
422-433 |
| 36 | NUMERICAL STUDY THE EFFECT OF NANOPARTICLE ADDITIVE ON TWO TYPES OF THE SHELL AND TUBE HEAT EXCHANGERS Naoman Abd-Alrhman Karam, Muna S. Kassim, Mishaal A. Abdkareem |
|
434-441 |
| 37 | EFFECT OF IRON FILLING ON THE BEHAVIOUR OF GYPSEOUS SOILS Naser Abed, Jawdat Kadhim Abbas |
|
442-448 |
| 38 | EXPERIMENTAL STUDY OF THE EFFECTS OF FLUID FLOW AND HEAT TRANSFER ON VIBRATION INDUCED BY WATER FLOW IN STRAIGHT PIPE WITH ORIFICE Salah H. Abid Aun, Safaa A. Ghadhban, Kadhum A. Jehhef |
|
449-464 |
| 39 | PROBABILISTIC RISK ASSESSMENT OF TYPICAL PROCESS PLANT USING EVENT TREE AND FAULT TREE ANALYSIS Iman Q. Al Saffar, Akram W. Ezzat |
|
465-477 |
| 40 | ON BACKSTEPPING CONTROL OF AN UNCERTAIN HOLONOMIC CONSTRAINED MANIPULATOR Phuong Nam Dao, Hong Quang Nguyen, Duy Khanh Do, Dinh Khue Nguyen |
|
478-484 |