| No | Content | Download | Pages |
|---|---|---|---|
| 1 | SOLAR HYBRID COOLING SYSTEM USING VARIABLE SPEED COMPRESSOR Hasanen Mohammad Hussain, Laith Jaafer Habeeb and Orhan Jalal Abbas |
 |
1-12 |
| 2 | WAVELET FEATURE EXTRACTION OF AREA FINGERPRINT SCANNERS AUTHENTICATION Esraa H. Abdul Ameer, Zahraa Faisal, Nora H. Sultan |
|
13-20 |
| 3 | PRINTING ANGLES OF POLYLACTIC ACID AND CARBON PARTICLES/POLYLACTIC ACID COMPOSITE AND THEIR EFFECT ON IMPACT STRENGTH OF 3D PRINTERS Ahmed Hadi Abood, Hiyam Adil Habeeb, Mohand Mosa Mohammad |
|
21-29 |
| 4 | OPTIMIZATION OF ELECTRO LESS OF NICKEL BASE COATING FOR CERMET CUTTING TOOLS SUBSTRATE Moqdad Jabor, Nabaa S. Radh, Manar Assaf Al-Kinani, Zainab S. Al-Khafaji |
|
30-40 |
| 5 | MECHANICAL PERFORMANCE OF FLOW-INDUCED SELF-COMPACTING STEEL FIBRE-REINFORCED CONCRETE USED FOR STRUCTURE OF HYDRAULIC WORKS Nguyen Viet Duc |
|
41-47 |
| 6 | MECHANICAL PROPERTIES OF RECYCLED NATURAL COMPOSITE MATERIAL WITH POLYESTER Zahra Khalid Hamdan, Zaineb w.metteb and Fadhel Abbas Abdulla |
|
48-55 |
| 7 | EXPERIMENTAL INVESTIGATION OF THE EFFECT OF FORCED VIBRATION ON NATURAL CONVECTION HEAT TRANSFER IN A CONCENTRIC VERTICAL CYLINDER Mohammed Mousa Al-azzawi, Atheer Raheem abdullah, Bassim Mohammed Majel, Laith Jaafer Habeeb |
|
56-65 |
| 8 | SIMULATION OF CONVERT SHALE OIL TO OIL BY RENEWABLE ENERGIES BY COMSOL Ayad Dari Jaafar, Bashar Jawad Kadhim, Auday Awad Abtan |
|
66-74 |
| 9 | INVESTIGATION OF HEAT TRANSFER ENHANCEMENT FOR DIFFERENT SHAPES PIN-FIN HEAT SINK Hadeel Abdulhadi Jasim, Muna S. Kassim, Ammar A. Hussain, Laith Jaafer Habeeb |
|
75-89 |
| 10 | THEORETICAL, SIMULATION AND EXPERIMENTAL STUDY OF RACK ANGLES AND VELOCITY EFFECTS ON SHEAR STRESSES AND STRAINS IN SHAPING PROCESS Malik N. Hawas, and Raed A. Mahmood |
|
90-98 |
| 11 | MANUFACTURING RESTRICTION SETTINGS IN THE PROCESS OF ADDITIONAL FORMATION OF SHEET METAL Haideer Taleb Shomran, Mohammed salih Hassan and Zuhair H.Obiad |
|
99-110 |
| 12 | AN INVESTIGATION OF MICROWAVE FURNACE EFFECTS ON MECHANICAL PROPERTIES OF STANDARD SPECIMENS USED IN TENSILE AND FATIGUE TESTS DUE TO DIFFERENT TYPE OF MANUFACTURING Ahmed A. Shandook and Shaker S. Hassan |
|
111-121 |
| 13 | STUDY THE IMPACT OF CHROMIUM AND YTTRIUM OXIDE ON THE MECHANICAL CHARACTERISTICS OF NIAL ALLOY USED IN AIRCRAFT ENGINES Alaulddin Abdulqader, Ahlam Hamid Jasim |
|
122-127 |
| 14 | ANALYSIS AND OPTIMIZATION OF ELECTRIC VEHICLE CONVERSION PERFORMANCE Fuad Zainuri, Danardono A. Sumarsono, Muhammad Adhitya, Rolan Siregar, Sonki Prasetya,Ghany Heryana, Nazaruddin, Iwan Susanto, Rahmat Subarkah, Ihsanudin |
|
128-137 |
| 15 | NUMERICAL INVESTIGATIONS OF FLUID STRUCTURAL INTERACTION FOR AIRCRAFT WING FLAP STRUCTURE USING CFD TECHNIQUE Ali Al-Zughaibi, Emad Q. Hussein, Farhan Lafta Rashid |
|
138-150 |
| 16 | INVESTIGATION ON THE EFFECT OF MACHINING PARAMETERS ON THE SURFACE ROUGHNESS AND RECAST LAYER DURING POWDER- MIXED EDM (PMEDM) Waqass S. Khudhir, Jalil J. Shukur, Adil Sh. Jaber |
|
151-158 |
| 17 | DESIGN OF PLANNING TRAJECTORY FOR THE PLANAR ROBOT MANIPULATOR USING LINEAR SEGMENTS METHOD WITH PARABOLIC BLENDS (LSPB) Wisam Essmat Abdul-Lateef, Abdullah Faraj Huayier and Naseer H. Farhood |
|
159-171 |
| 18 | MODELLING STUDY OF THE OPTIMAL OPERATION CONDITIONS OF CO2 CAPTURE FROM NATURAL GAS USING ACTIVATED METHYLDIETHANOL AMINE Zaid Nidhal Shareef, Falah K. Matloub and Muataz Mohammed Sulaiman |
|
172-180 |
| 19 | VIBRATIONS ANALYSIS OF FUNCTIONALLY GRADED BEAMS AT DIFFERENT BOUNDARY CONDITIONS Qasim abbas Atiyah, Imad Abdulhussein Abdulsahib |
|
181-188 |
| 20 | QUASI-STATIC INDENTATION BEHAVIOUR OF CARBON-BASALT HYBRID CYLINDRICAL COMPOSITES Naseer H. Farhood, Wisam Essmat Abdul-Lateef, Khalid F. Sultan |
|
189-197 |
| 21 | NUMERICAL SIMULATION OF AIR DISTRIBUTION IN THE LECTURE ROOM EQUIPPED WITH DIRECT EXPANSION AIR CONDITIONER Mohammed Helayel Resun Al karaishi, Hazim Jassim Jaber, Ahmed A. Taher†, Wisam Mohammed Mareed, Laith Jaafer Habeeb |
|
198-207 |
| 22 | ENHANCEMENT OF FORCED CONVECTION HEAT TRANSFER IN TUBES AND HEAT EXCHANGERS USING PASSIVE TECHNIQUES: A REVIEW Mahmoud A. Mashkour, Hasan Shakir Majdi, Laith Jaafer Habeeb |
|
208-218 |
| 23 | NUMERICAL INVESTIGATIONS OF MULTIPHASE POOL BOILING IN MICRO-CHANNELS WITH SEVERAL COOLING MATERIALS Ali Najim Abdullah Saieed, Mahmoud A. Mashkour, Hasanen Mohammed Hussain, Laith Jaafer Habeeb |
|
219-230 |
| 24 | REDUCING ENERGY CONSUMPTION BY USING FEATHERS AS CHICKEN RESIDUES IN SOLID CONCRETE MATERIALS (EXPERIMENTAL AND NUMERICAL STUDY) Atif Ali Hasan, Baydaa Hussain Maula, Riyadh Husni Aljawad, Kadhum Audaa Jehhef |
|
231-241 |
| 25 | HOLE-CLINCHING JOINT OF POLYMER TO TITANIUM SHEETS, EXPERIMENTAL AND NUMERICAL ANALYSIS Lubna Saad Jameel, N.S.M. Namer, Sami Ali Nama |
|
242-250 |
| 26 | INVESTIGATION OF MIXED CONVECTION IN CAVITY WITH DIFFERENT ASPECT RATIO CONTAINING CORRUGATED HOT CIRCULAR BODY Mohammed Kadhim Hamza, Qusai Adnan Mahdi |
|
251-264 |
| 27 | EFFECT OF CDS NANOPARTICLES ON THE OPTICAL PROPERTIES OF (PVA-PVP) BLENDS Araa Hassan Hadi, Majeed Ail Habeeb |
|
265-274 |
| 28 | INVESTIGATE THE PERFORMANCE OF SOLAR GAS HEAT PUMP HEATING SYSTEM Mugdad Hamid Rajab, Maysoon Anwar Abdullah, Marwah Noori Mohammed, Thamir Khalil Ibrahim |
|
275-288 |
| 29 | FABRICATION OF HYBRID COMPOSITE MATERIALS LEAF SPRING Ekhlas Edan Kader,Rania Adwan, Lutfi Yousuf Zedan |
|
289-297 |
| 30 | HEAT TRANSFER ANALYSIS OF AIR FLOW THROUGH IRREGULAR GEOMETRIC DUCTS Dhurgham H. Talib, Rafel H. Hameed, Adil A. Alwan |
|
298-313 |
| 31 | THE COMBINING EFFECT OF CHANGING FORMING PATH AND HEATING EFFECT DURING STRETCH FORMING PROCESS TO ENHANCE THE FORMABILITY OF AL 6061 SHEET Anas Obeed Balod, Amer Yahya Aljarjees |
|
314-321 |
| 32 | THE WEAR CHARACTERISTICS OF THERMOSET POLYMERS COMPOSITES FILLED WITH CERAMIC PARTICLES Mohammed J. Kadhim, Hamza M. Kamal and Layla Muhsan Hasan |
|
322-333 |
| 33 | DESIGN AND DEVELOPMENT OF THE SOFT ROBOTIC GRIPPER USED FOR THE FOOD PACKAGING SYSTEM Hoang Minh Dang, Chi Thanh Vo, Nhan Tran Trong, Viet Duc Nguyen, Van Binh Phung |
|
334-345 |
| 34 | NATURAL CONVECTION HEAT TRANSFER OF NANOFLUID AROUND CIRCULAR CYLINDER LOCATED IN AN OCTAGONAL ENCLOSURE Asmaa Ali Hussein |
|
346-358 |
| 35 | REVIEW ON NATURAL CONVECTIVE HEAT TRANSFER INSIDE CAVITIES Asmaa Ali Hussein |
|
359-369 |
| 36 | SIMULATION STUDY OF THE EFFECT OF AXIAL FEED ON COMPRESSIVE AND TENSILE STRESSES DISTRIBUTION OF AL6061 DURING THE SHOT PEENING PROCESS Mohammed Helayel Resun Al karaishi, Ali Yousuf Khenyab, Hazim Jassim Jaber, Laith Jaafer Habeeb |
|
370-382 |
| 37 | MANUFACTURING AND ANALYZING OF A NEW PROSTHETIC SHANK WITH ADAPTERS BY 3D PRINTER Ameer A. Kadhim, Esraa A. Abbod, Ahmed K. Muhammad, Kadhim K. Resan, Muhannad Al-Waily |
|
383-391 |
| 38 | REVIEW INFLUENCE OF LOADS UPON DELAMINATION BUCKLING IN COMPOSITE STRUCTURES Zaman Abud Almalik Abud Ali, Ameer A. Kadhim, Rasha Hayder Al-Khayat, Muhannad Al-Waily |
|
392-406 |
| 39 | ENHANCEMENT OF FORCED CONVECTION HEAT TRANSFER FROM CYLINDRICAL PERFORATED FINS HEAT SINK-CFD STUDY Nabeel Abdulhadi Ghyadh, Sahib Shihab Ahmed, Maher A.R. Sadiq Al-Baghdadi |
|
407-419 |
| 40 | A REVIEW OF THE RECENT RESEARCH ON THE EXPERIMENTAL TESTS OF FUNCTIONALLY GRADED SANDWICH PANELS Emad Kadum Njim, Muhannad Al-Waily, Sadeq H. Bakhy |
|
420-441 |